Hello,
i have a Senheisser wireless mic receiver and i need to attach it to my EX1r.
What is the suggested way?
I am thinking for the hot shoe but i need something for it.

There is an accessory that comes with the Sennheiser units that is a hot shoe mount. It's the part with silver bent wire that cradles the receiver, and has a black plastic piece that fits the hot shoe and screws down tight. It comes with every sennheiser receiver.

There is an accessory that comes with the Sennheiser units that is a hot shoe mount. It's the part with silver bent wire that cradles the receiver, and has a black plastic piece that fits the hot shoe and screws down tight. It comes with every sennheiser receiver.

It's also a royal PITA! Unless the hotshoe on the EX1r has been changed, the Sennheiser shoe mount is too thick to slide in and needs to be filed down to work.

Thanks for the reply.
I have lost this accessory, two years ago and now i need it.
Is it possible to order it from Senheisser?

Thanks for the reply.
I have lost this accessory, two years ago and now i need it.
Is it possible to order it from Senheisser?

Try making a phone call to B&H or Sennheiser. I'm sure they are available.

Perrone, I have the EX1 (nor R) and the shoe mount works just fine - not tight to push in at all. But I don't put my G3 directly in my camera's shoe mount anyway. I prefer to use one of these:

Rycote | 037303 Hot Shoe Extension | 037303 | B&H Photo Video (http://www.bhphotovideo.com/c/product/407098-REG/Rycote_037303_037303_Hot_Shoe_Extension.html#specifications)

It will hold a light AND my wireless. Then I use a Rode SM5 placed in my camera's mic holder to support my microphones: Rode | SM5 - Shotgun Microphone Suspension | SM5 | B&H Photo (http://www.bhphotovideo.com/c/product/463089-REG/Rode_SM5_SM5_Shotgun_Microphone.html)

So I can comfortably fit 3 accessories on my camera. I'll try to attach a photo here:

Perrone, I have the EX1 (nor R) and the show mount works just fine - not tight to push in at all. But I don't put my G3 directly in my camera's show mount anyway. I prefer to use one of these:


You have a G3, I have a G2. I wonder if they are different.

I have G2 and G3. They both seem the same. Try turning the square thing that goes into the shoe mount 90 degrees. Or just loosen the round thing you screw down to secure the mount to the shoe.

It's only plastic anyway, so a little filing would be easy if it really needs it. I had to file down my Rode SM3 shockmount so it would work with an HV20 camera - and that was a PITA as it's metal. Anyway that hotshoe extension is awesome for the price and now I can fit all I need. They even have one twice the length for twice the price if you want to put a bunch of stuff on.

You can also use a system like mine where there is a wing for attaching wireless mics etc, without putting more stress on the somewhat under designed tripod mount on the EX1.

And it also has options for a shoulder mount system that balances the EX1 cams much better when off the sticks.

My site:Stronger Tripod Plates . NanoFlash Brackets . Sliders by Westside A V (http://www.westsideav.com/EX1plate/)

Or contact me for more info:
olof@westsideav.com
603.383.9283

Here you go, Giannis:

Sennheiser | CA2 Shoemount Adapter | CA2 | B&H Photo Video (http://www.bhphotovideo.com/c/product/328035-REG/Sennheiser_CA2_CA2_Shoemount_Adapter.html)

dave

I have the G2 and mine mounts just fine to my EX1, no filing required.

No issues with my Evolution G2 hotshoe unit.

Hmm. I need to revisit this then. I got two of those mount kits and had the same issue with both.

We've got something like 8x G2 kits and several G3 kits, never had an issue getting them to fit any cold shoe on any camera.
There are some cold shoe attachments that are too thick to fit some of the Sony cold shoes. I've also seen users get mighty confused because some of the cold shoes on some cameras have tiny stops at one end. These typically have an arrow...and yet...:)

Hey Giannis, when you get the new shoe mount insert into the camera from the front, not the rear. The rear has a stop built into it so the opening is smaller. At least on my EX1 it is.

Gene...

Hello,
i have a Senheisser wireless mic receiver and i need to attach it to my EX1r.
What is the suggested way?
I am thinking for the hot shoe but i need something for it.


I use the J-Jode fits in the mic holder dual shoe mount.



The J-Rod Twin Micropone Mount and Professional Video Camera Accessories & Shoulder Mount (http://web.me.com/jeffyr/Jrod/Home.html)