View Full Version : Private Classifieds listings from 2011



Tom Robertson
October 16th, 2011, 08:22 PM
Lowering the price to a bargain $1695 shipped, CONUS only.

Tom Robertson
October 16th, 2011, 11:00 PM
Cam body and grip are both sold.

Jawad Mir
October 17th, 2011, 05:38 AM
ATLAS 10 and APPLE CARE are sold

Paul Cronin
October 17th, 2011, 07:03 AM
Will do Luc,

Once I sell the body which has to go first since I am using the gear, then I will sell everything else. Still hope to sell at lease the body, lens, VF as a kit.

Keith Rollinson
October 17th, 2011, 10:23 AM
Glad all arrived safe and sound, Tyge - thanks for the kind words.

Edward Mendoza
October 17th, 2011, 11:45 AM
I have the software-in-a-box retail version for PC but the license with it is no good so I'm not sure how much good it would do for you. (Originally purchased this version and installed it but I got a MacBook Pro a short time later and I needed the MAC version of the software instead; so I had to uninstall and Adobe had to destroy the license before issuing me a MAC key)

Jaime Espiritu
October 17th, 2011, 11:48 AM
I have the software-in-a-box retail version for PC but the license with it is no good so I'm not sure how much good it would do for you. (Originally purchased this version and installed it but I got a MacBook Pro a short time later and I needed the MAC version of the software instead; so I had to uninstall and Adobe had to destroy the license before issuing me a MAC key)

Which version is the AE?

Keith Rollinson
October 17th, 2011, 12:28 PM
The KATA CC-195 camcorder case has been sold! Thanks, Jim!

Frank Simpson
October 17th, 2011, 02:57 PM
Ed, are you still with us?

Jawad Mir
October 17th, 2011, 03:34 PM
davis and sandford tripod and dolly sold as well

Jared Teter
October 17th, 2011, 05:54 PM
I am selling my Cinevate Atlas 10 slider that is in mint condition. I used this slider for one project, it works perfectly. I have the box and all of its contents. Asking $550. See the attached pictures and feel free to email me with any questions. I am open to offers so feel free to make them.

Ryan Kincaid
October 17th, 2011, 07:59 PM
SOLD!!!

Thanks for all interests

Mike Gorski
October 17th, 2011, 08:25 PM
BUMP. Price reduced to $1500.00 USD. Thanks.

Edward Mendoza
October 17th, 2011, 10:12 PM
Cs5........

Jaime Espiritu
October 17th, 2011, 10:36 PM
Cs5........

How much would you like to sell for? I just want to use Digital Juice Templates and other AE templates for my productions.

Jozef Zitnansky
October 18th, 2011, 01:03 PM
Okii Systems USB Focus Controller gives the photo and video enthusiast a compact yet powerful device that enhances the capabilities of HD video enabled Canon EOS Digital SLR cameras, including:
EOS 5D Mark II
EOS 1D Mark IV
EOS 7D
EOS 60D
EOS 600D/Rebel T3i/Kiss X5
EOS 550D/Rebel T2i/Kiss X4
EOS 500D/Rebel T1i/Kiss X3

USB Focus Controller (http://www.okii.net/product_p/ct-001.htm)

used, in perfect condition, no damage
price: 280 EUR (postage included)

Geoff Dills
October 18th, 2011, 01:18 PM
I have 5.5 I would like to sell if you're still looking.

Geoff Dills
October 18th, 2011, 01:23 PM
Getting production suite so would like to sell AE.

Jawad Mir
October 18th, 2011, 02:12 PM
Title says it all. It comes with a battery charger, battery and a bag.

$260 shipped

David Draper
October 18th, 2011, 03:33 PM
Any takers?

Price is open to negotiation.

DD.

Dave Lammey
October 18th, 2011, 03:52 PM
I am closing down my video business, and as a result, I'm selling my three Sony FX1 cameras.

The first one I'm selling is pictured. It has been modified with the Z1 mic mount, so the hot shoe on the camera is still free for any additional accessories.

Great condition, works great, no scratches, lens is pristine. Always kept in a protective case, handled with care. Bought it in 2007 and used it mostly as a second camera (mounted on a tripod) for shooting weddings from 2007 to 2010. About 20 weddings a year, and it was used maybe two hours per wedding. Then in 2011 I used it as my main camera (handheld and tripod) for about 13 weddings.

$1200 plus shipping.

Forgot to mention -- comes with all original accessories, as well as a large N970 battery.

Jaime Espiritu
October 18th, 2011, 03:53 PM
I have 5.5 I would like to sell if you're still looking.

Thanks, Geoff.
I'm looking to use the Digital Juice Templates and they seem on only favor AE CS3 and above.

Geoff Dills
October 18th, 2011, 07:33 PM
Isn't 5.5 above? It's the latest version.

Jaime Espiritu
October 18th, 2011, 07:43 PM
Isn't 5.5 above? It's the latest version.

Sorry. I misunderstood. I didn't see the CS acronym.

I had AE 4.1 years ago then AE 5 etc... [and this was before the CS acronym]

How much would you like to sell for?

I apologize.

Geoff Dills
October 18th, 2011, 07:57 PM
$400

I have the Mac discs but can simply transfer my license through Adobe and you can download the software to save shipping if you prefer.

Billy Mead
October 18th, 2011, 11:19 PM
Because of a HORRIBLE divorce that I am going though and the need to fight for custody, I am selling off a very complete Digital Film/Video Editing and Audio Production System I have painstakingly built and maintained over the last 5 years! It KILLS me to do this and let it go, but lawyer fees are cutting into my ability to eat and feed my 8-month old baby.. but her safely is worth it, after all, it's just STUFF! I have a good amount invested in hardware and software and we have done more than one Feature Length Film on this system!! It is also a rock solid Audio Production System (Logic, Fireface 800 Audio Interface, ADAM A7 Reference monitors, etc.) Please contact me with best offer and it must sell so call with your offer...

Take a look at the specs (32 GB RAM, 32 TerraByte XServe RAID, etc.) and please call me or email immediately as I must sell ASAP.. 617-596-5793.

Hardware
Mac Pro Tower - 2 x 2.8 Ghz Quad Core Processor Intel Xeon with 32 GB of RAM
Dual HANNS-G 32" Cinema Displays
Apple Xserve 36 TB RAID Array w/Fiber Card (you can edit an entire feature length MOVIE with this much disk space!!)
Mackie Big Knob Studio Command System
RME Fireface 800 FireWire Audio InterfaceBlackmagic Design HD Link Pro
(2) ADAM Audio A7 6.5" Audio Reference Monitors
(2) Kik-Rocket Preview Monitors
Kik-Rocket Subwoofer
Illustration Pen Tablet

Software
Final Cut Studio 6.0
Logic Studio 8
Apple Shake
iStopMotion
Live Type
Cinema Tools
Motion
Sound Booth
Sound Track Pro
Adobe Premiere
Adobe Photoshop CS3
Adobe After Effects
Adobe Illustrator CS3
Red Bullet Looks Plugin Suite
Digital Film Tool 55mm Plugins

Jeff Harper
October 18th, 2011, 11:26 PM
Kit for sale at a stupidly low price: .

Panasonic GH1
Sigma 18-50mm F/2.8 lens for Olympus PLUS Panasonic adapter for the GH1 (adapter is $100 new)
Sigma 30mm F/1.4 for Olympus
Rokinon 8mm Fisheye for Canon + adpater for GH1 used once
Canon FD 135mm F/2.5
Panasonic Shotgun Microphone made for GH1/GH2, no adpater needed.

The Sigma lenses alone are worth $650, the Rokinon is worth $225 used, the GH1 is worth $300, and right there you're already at over $1000 value, and these are conservative prices. The Sigma zoom is a great lens, and virtually IMPOSSIBLE to find anywhere.

Add em up, the value of all items listed is conservatively worth $1400, closer to $1500.

For sale for $1100 via Paypal only. Basically you buy the lenses and you get the camera and mic for free.

Call Jeff 513-708-3362

John Doran
October 19th, 2011, 07:02 AM
Looking for a JVC GY-HD100/200 viewfinder in good shape.
Thanks.

Steve Nunez
October 19th, 2011, 07:53 AM
I'll take it- send me a Paypal "Request Money" invoice and I'll pay immediately, thanks.

steve@stevenunez.com

Brandon Barnard
October 19th, 2011, 09:52 AM
I don't even know where to start with an offer. What is your ballpark estimate as to how much you want for it?

Keith Rollinson
October 19th, 2011, 10:18 AM
The MEDEA RT3 and the GLIDERS camcorder support have been sold!

Brian T. Young
October 19th, 2011, 10:53 AM
Full description below.
Pictures at: Sound Devices Mixer Kit For Sale - $1850 Full Description Below Pictures (http://tinyurl.com/302mixer)

Please email me direct.

Brian Young
Los Angeles, CA
310-801-0080
FlacaProductions@mac.com
www.FlacaProductions.com


SERIAL NUMBER: 400505041006

This kit forms the core of a quality ENG field mixer package. Just add a power source to the BDS, wireless and a boom.

I’m a freelance network cameraman and this bag was used mainly for live shots. Owner-operated. Never rented.

This package would take nearly $2500 to put together today - buy it here for $1850.00

The details:
Sound Devices 302 - Exceptional shape. Small amount of cosmetic wear to the "ears" on each end.
Operationally perfect.
$1300 new

Tape-Out to 2 Lectrosonics TX - (TA3F to 2 TA5F) Y-Cable.
Plug your Lectro transmitters right in - and keep your XLR outputs open (for the included Remote Audio Snake) and feed two destinations at the same time.
$45.00 new

BDS - V3 - which is no longer available, but is still a solid, essential piece of gear.
To purchase the current BDS V4 would cost $240

4 power leads - 2 to the TX side, 2 to RX side - fitted to power Lectrosonics.
$120 value ($30/each - probably more)

1 short 4-pin male to the BDS power IN. Add your own power source to the 4-pin in or replace it with your own source such as an NP1 sleeve.
$45 value

2 mic/line switching xlr cables - from Sound Devices NO LONGER AVAILABLE, but VERY handy.
(20-inch) XLR-F to XLR-M cables with integrated 40 dB attenuation switches. Uses Neutrik FXS Type switch at the XLR-M connector. If you've used a 302, you know that you must go into the menus to change the outputs from mic to line. If you're in a hurry, this isn't optimal. These cables allow the 302 output to always be set at LINE and then you can simply (and quickly) twist the dial on the XLRs to make the output Mic level.
$60 - if you could get em...

90 degree, coiled boom cable - perfect
$50.00

Remote Audio snake - perfect
$240.00

Petrol PEGZ-1 bag - w/strap and 4 TX/RX pockets - 2 on the TX side, 2 on the RX side
PEGZ-1 | petrolbags.com (http://www.petrolbags.com/PEGZ-1)
It’s in GREAT shape. This model is no longer available, but the replacement would be the PS602 Deca Eargonizer Bag (Large)
$245 to replace

Billy Mead
October 19th, 2011, 11:05 AM
Right now I have a top offer for $4300 and I WILL sell it by end of day, so please write or call!! 310-428-8033

I can directly process Credit Cards as well as PayPal, Bank Transfer etc.

Jon Shuler
October 19th, 2011, 03:09 PM
Is this Mac or Windows version? How much?

John Okafor
October 19th, 2011, 09:15 PM
What is the price?

Mestizo Devon
October 19th, 2011, 10:19 PM
Bump

Desk fruit!

Will anyone put this to use???

Keith Rollinson
October 20th, 2011, 10:49 AM
From the depths of storage I recently released my Sony EVO-9850 Hi8 studio recorder. Sadly this old, long-forsaken friend has a twitch...

The BAD news -- it powers up just fine, but immediately after inserting a tape, and attempting to control it, displays an "Error 20" fault (and no, I don't know what that is), and will not play a tape. I took the top lid off to have a peak, but could not find anything visually wrong. It consistently gives this error code.

The GOOD news -- it powers up just fine. It also is physically in excellent condition. This was my studio deck back in the day, and it never travelled outside the equip room. Hi8 not being exactly the best of professional formats, the deck saw relatively little use. I'd think if one was to repair the cause of the error code it would go for a loooong time. Bonus 1 - includes the EVBK-100 timecode I/O option. Bonus 2 -- includes 19" rack mount kit. Perhaps even the orig manual is lying around here someplace...

Worth the $50 + shipping just to cherish on your coffee table.

Aaron Merrill
October 20th, 2011, 11:28 AM
High Definition 37" Touch screen 1080p 1920x1080. Pulled from a working high-end professional recording studio. Monitors are Sceptre x37 integrated with Magic Touch by Keytec. I have 2 of them for sale (auction is just for 1, but email me if you want both) Originally cost me $3,000.00 a piece. Monitors accept a number of digital and analog connections including HDMI/DVI, VGA, Component, etc. Touch screen utilizes the USB-XD controller, has a 4000x4000 precision resolution, and works with almost all operating systems from PC to Mac to Unix, etc. Comes with power cord, remote control, removable side speakers, removable base, USB-XD controller, touch screen software disc, and calibration pointer tool.

For more info on the monitor part: http://www.sceptre.com/products/lcd/specifications/spec_x37sv-naga.htm

For more info on the touchscreen part: KEYTEC is a USA based leading touch screen interactive monitor manufacturer since 1987 - add-on & built-in standard & custom designed touchscreen, integrated LCD touch monitor, large IR optical touchscreen, DIY interactive whiteboard, PC tablet, & ki (http://magictouch.com/)

For more info on the touchscreen controller and drivers: KEYTEC (http://www.magictouch.com/support_usb_xd.html)

These touchscreens are great. You'll love them, they change the way you think about and interact with computers. Very cool. Feel free to email me with questions. info at aaronmerrill dot com

For sale on ebay:

37 inch LCD touchscreen 1080p 1920x1080 High Definition | eBay (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200665781482)

Edward Mendoza
October 20th, 2011, 11:32 AM
Sorry getting back to you late Jaime, looks like Geoff's taking care of you. If things don't work out, let me know, I've still got the software. Thanks...

Dan Asseff
October 20th, 2011, 04:46 PM
Les,

Thank you, very nice product.It is in perfect condition. Works great with my Sony FS100

Dan

Jeff Harper
October 21st, 2011, 06:11 AM
Price lowered to $950, excluding microphone.

Includes 5 camera batteries (Panasonic Brand).

Selim Abdullai
October 21st, 2011, 12:11 PM
I have a Beachtek DXA-8 Audio Adapter in excellent working condition. Has been sitting for quite some time, and needs to go!!!

$125 Shipped.

I also have a Cavision MB385P 3x3 rubber matte box, RPMD90 mini dv plate, ARP380 adapter ring, and RPSHC spacer for Sony A1U/HC1. I used this setup for my Sony HC1 and it worked great. Sold my HC1 a while back, and now this has also been sitting for some time. In excellent condition.

$150 Shipped.

I only accept PayPal as a form of payment. Items will be shipped via USPS Priority Mail. If you have any questions, feel free to ask. Thank you.

Stuart Cummings
October 21st, 2011, 01:26 PM
New B stock AJA Kona LHi HD/Sd card with LHI Break out box. New Price is $1850.00 I am giving this away at an unheard of price of $1000.00 This is a new demo product with very light demo use only. Still under warranty call Stuart for more info at 561 213-5209 or stuart@watermarkhd.com

Jared Teter
October 21st, 2011, 03:29 PM
Make some more offers...the offers that I have received are close but I just need a bit more.

Chris van der Zaan
October 21st, 2011, 04:15 PM
Whats coming with it?

Zachary Fink
October 21st, 2011, 05:29 PM
Did your crane sell?

Bill Rankin
October 21st, 2011, 11:47 PM
Sold!!!!!!!!!

Ed Fiebke
October 22nd, 2011, 04:09 AM
Frank -

Apologies for getting back to you so late. Yes. . . I'm still here! LOL!

This Mac Pro is still for sale as I orginially advertised. I'm willing to throw in a MOTU 828 MK2 audio device if it will help firm the sale. I do not need the 2408 and it works just fine. It connects to a computer via the firewire port and offers clean audio I/O.

So. . . if you're still interested, this Mac Pro is still available.

Thank you (and, again, apologies for getting back to you so late!)

Sincerely,

Ted

Ed Fiebke
October 22nd, 2011, 12:57 PM
I know that one can purchase an Early 2006 Mac Pro on eBay for a bit less $$$$. But it seems that those computers are stripped with one HDD and less RAM. The Early 2006 Mac Pro computer that I'm offering has 8 GBs RAM, FOUR HDDs, the new graphics card, an eSATA card for further expandability and, now, a MOTU 828 MK2 audio I/O device. Just the "newer" upgrade features alone (now including the 828 MK2) is worth $1000.00. It's almost as if one is getting the computer for free. . . .

Just a thought. . . .

:)

(I'm a nurse, not a salesman, Kirk. . . ) LOL!

James Palanza
October 22nd, 2011, 02:37 PM
You willing to just sell the sigma lens? palanza@gmail.com is my email. (the sigma zoom btw)