Mark Moreve
August 23rd, 2009, 01:48 PM
Hi
I just thought you may be interested. I have just completed a two week shoot filming a 90min feature called Love Loss starring Virginnia Mckenna and Keith Mitchel entirely on the 5dmk2. You can check out the blog of the film at Love/Loss (http://www.love-loss.com) where you can also see a few of the shots from the film that the director took from the footage that we filmed. ( only a couple of the shots are from the film. I'm sure you can figure out which ones!)
I shot using my two zooms a 24 -70 f2.8 & 70 - 200 f4 and mainly worked at between 100 to 640 iso. I shot at a 50th throughout & used the neutral picture style.
As for camera hardware I used a proaim bars & wedge plate system but because the proaim follow focus broke on the 1st morning ( nightmare & going to get money back hopefully!!!) I hired a Chroziel follow focus and matte box.
Filter wise I kept it simple by using a Schneider tru pol on most exteroirs and a ND.6 & also ND grads (.3,.6,.9 & 1.2) on skys when we needed them.
Monitoring was the biggest problem I used my Sony PVM9044 but mainly just for playback. Otherwise it was mainly just using a black drape over the top of the camera ( funny how with all this technology you end up going back to old methods). This monitoring solution was not the most popular solution by the other people in the crew. The sound recordist was most un happy ( aren't they always?)
A note on sound: The mixer recorded to a sound devices compact flash card 12 channel mixer he used Audio ltd 2040 radio mics with sanken cos 11 mics and also sennheiser mkh 60's & 50's. He also used a schoepps mic on a couple of occasions. He recorded at 30fps and we did a sync test before we started. We used a Clapper board for sync.
Our Focus puller hated the Canon lenses as they do not stop rotating so we rigged up a G clamp and Noga arm system so we could stop the lens rotating. He still did distance checks at every opportunity.
A note on editing and grade.
Our editor copied each card and made 3 back ups of it. He then converted the footage to Prores HQ & is now editing. The grade is going to be done at the Mill in Soho.
I have attached a couple of shots of the camera on location ( NO red rock or Zaccuto here!!!)
All the best
Mark
P.S: I have also included a shot of the broken Pro aim Follow focus gearing that snapped (PLASTIC GEARS!!)
I just thought you may be interested. I have just completed a two week shoot filming a 90min feature called Love Loss starring Virginnia Mckenna and Keith Mitchel entirely on the 5dmk2. You can check out the blog of the film at Love/Loss (http://www.love-loss.com) where you can also see a few of the shots from the film that the director took from the footage that we filmed. ( only a couple of the shots are from the film. I'm sure you can figure out which ones!)
I shot using my two zooms a 24 -70 f2.8 & 70 - 200 f4 and mainly worked at between 100 to 640 iso. I shot at a 50th throughout & used the neutral picture style.
As for camera hardware I used a proaim bars & wedge plate system but because the proaim follow focus broke on the 1st morning ( nightmare & going to get money back hopefully!!!) I hired a Chroziel follow focus and matte box.
Filter wise I kept it simple by using a Schneider tru pol on most exteroirs and a ND.6 & also ND grads (.3,.6,.9 & 1.2) on skys when we needed them.
Monitoring was the biggest problem I used my Sony PVM9044 but mainly just for playback. Otherwise it was mainly just using a black drape over the top of the camera ( funny how with all this technology you end up going back to old methods). This monitoring solution was not the most popular solution by the other people in the crew. The sound recordist was most un happy ( aren't they always?)
A note on sound: The mixer recorded to a sound devices compact flash card 12 channel mixer he used Audio ltd 2040 radio mics with sanken cos 11 mics and also sennheiser mkh 60's & 50's. He also used a schoepps mic on a couple of occasions. He recorded at 30fps and we did a sync test before we started. We used a Clapper board for sync.
Our Focus puller hated the Canon lenses as they do not stop rotating so we rigged up a G clamp and Noga arm system so we could stop the lens rotating. He still did distance checks at every opportunity.
A note on editing and grade.
Our editor copied each card and made 3 back ups of it. He then converted the footage to Prores HQ & is now editing. The grade is going to be done at the Mill in Soho.
I have attached a couple of shots of the camera on location ( NO red rock or Zaccuto here!!!)
All the best
Mark
P.S: I have also included a shot of the broken Pro aim Follow focus gearing that snapped (PLASTIC GEARS!!)