Gary Chvatal
January 23rd, 2008, 02:05 PM
I just bought a used DVC60 (with 24 hours on the meter). Checking it out this afternoon...looks like a nice camera.
Anyway...I just noticed that the battery charger has a seperate cable that connects the cam to the charger when using AC to power the camera. Well that DC cable is missing.
Is that a generic type cable that I could buy at an electronics retailer or will I need a special order Panny part. I hate to buy the whole charger assembly just to get that one cable...
Any ideas? Thanks
Gary Chvatal
January 23rd, 2008, 05:52 PM
I saw a link to Panny's parts ordering web site. Ordered the cable...it will be less than $20 with shipping...
Now I'm going to go try out the cam....
Matt Stamm
April 5th, 2008, 12:13 AM
So I rented a DVC60 from my school for the weekend, and when the guy was packing everything up, I asked if he had a charger for the camera. (This was after he tested the camera to make sure it was working, it was). So he looks around and sees a charger plugs it in, nothing happens. Then he looks at it, oh this is for a laptop, no sorry man but you have 2 batteries you should be fine. So I take it and all.
When I got here, the camera would not turn on. I checked the voltage for its DC in, and it was 7.9 Volts. I looked at the charger for MY laptop, and it said 65 volts, probably similar to the one that he plugged in. Did this fry the camera? Blow a fuse? I really need to shoot this project this weekend, is there anything I can do to get this fixed?
Giroud Francois
April 5th, 2008, 06:56 AM
yes , laptop charger are usually around 20V, so there is a big chance that something is fried in the camera.
Chris Hurd
April 5th, 2008, 07:17 AM
Sorry, there is no remedy other than sending the camera to an authorized Panasonic repair facility.
Most likely a master fuse inside has blown but there is no way to replace it yourself.
Moved from Open DV Discussion to Panasonic DVX / DVC.
Steve House
April 5th, 2008, 12:14 PM
And let's hope the school accepts responsibility for the repair cost since it was THEIR tech that did the damage as you were picking it up.
Tim Meier
April 13th, 2008, 09:53 PM
If you find that the school wants you to pay for the camera this what i would do. So you know I have a dvc-60p and it has more then 290 hours on the head. It is a great camera if you use a sound mixer and go in via the XLR jacks. the mikes are only good in low noise levels. any way if you can find someone local like myself who is good at repairing stuff you can find the shop manual on line at manualsparadise.com i know that they have the manual for the dvc-30 it is the same as the dvc-60 with out the XLR'S Just a thought. GOOD LUCK. You can buy parts on line also i have had to replace a dew sensor before.