Hi again, folks

Canon Wide Converter + Hama Hood

I'm wondering if these two add-ons will work together.

If so, will the Hama Hood connect to the Canon wide-converter and what (if any) step-up rings are needed?

Cheers,
Earon

Earon,

They won't work together. First of all, the wide converter doesn't have threads on the front and secondly, it's too wide across the front for the Hama to fit.

Anyway to stop the shutter effect from closing when taking a picture?


Thanks
RB

You can change or disable the sound, but not the visual effect. Bummer!

I was just reading the “Canon Optura 40 vs. Elura 70 Comparison” article (http://www.dvinfo.net/canonoptura/articles/optura40elura70-2.php) and I noticed that Chris Hurd says “The WA-34 wide-angle attachment included with the Elura 70 converts the field of view at the wide end to 35.4mm respectively (once again, in 35mm still photo equivalent terms). The WA-34 is not a zoom-through adapter, however. It works properly only when the lens is zoomed out all the way to full wide angle.”

I haven’t run across this concept before and it seems odd that Canon would have a lens that only works when zoomed to full wide angle. This would severely limit its use, to the point of being nearly worthless. I would expect to be able to use the zoom with the lens attached. What is the problem when you zoom in with the WA attached?

Does this problem also apply to the WD-H34 lens that is used on the Optura 40?

Can anyone help me understand what the problem is and why any wide angle or telephoto attachment lens would not be “zoom through”?

Thanks,
Bob

ok when i put on night mode its all blurry and slow motion?
anyone know whats wrong. on my friends jvc it dose the same thing. were both confused. anyhelp is greatly appreciated.

That's the way it works. You're not doing anything wrong. Night mode slows down the shutter speed to either 1/15 or 1/8 which results in blur. The other effect you may notice is that the image is grainier than normal and doesn't have a lot of color. Same thing happens on the Optura Xi.

It's mainly good for low light shots where not much stuff is moving and I've found it good for dreamy and suspenseful scenes.

A really cool effect with the night mode setting is to put something in front of your light source that casts moving shadows, like a leafy tree branch in windy conditions or a glass pane with water pouring/dripping onto it - the results can make some really interesting and freaky images - especially facial close ups.

Otherwise, add more light! And if you can't, c'est la vie.

I tried my sb 24 but it doesn't fire .
Thanks

RB

The DVSpot review of the Optura 20 mentions the VFL-1 combo light and flash but its rather pricey at almost $100.

Click here (http://www.dvspot.com/reviews/canon/optura20-review/index_pfv.shtml) for the review.

Click here (http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=279245&is=REG) to purchase the VFL-1 from B&H.

A friend has a Canon MV1 which he likes but can't get to connect via firewire. I tried on my PC (Fast high end box, latest professional software and works with my cameras).

Appart from tossing the MV1 into the bin has anyone got any advice? Many Thank!

Howdy from Texas, Malc,

Yanks will know the MV1 as the PAL version of the original Optura from 1997. Do not toss it in the bin. It is one of the very few DV camcorders which has actually appreciated in value. Due to its unobtrusive SLR shape, one of these in good working order today can fetch more than what it was bought for new.

There are a couple of possible explanations for your problem. First, because of its age, the PC may not be recognizing it as a FireWire device. Traditional non-linear DV editing software such as Adobe Premiere may recognize it within the application, though.

Second, it could simply be a bad FireWire jack on the camcorder. Contact your local Canon-authorized service facility (find it at this site: http://www.canon.com.au/support/locator.aspx?m=se&pid=/cameras/cameras_video/dmmv1) and see if they can help. It could probably use a professional cleaning anyway.

Best of luck,

Hi, I have been browsing these forums for the past 4 days having just found this website. I have been looking to replace my Sony DCR-TRV11 bought in 2000. It is a 1/4 CCD with approx. 680k pixels.

I thought I had to step up to a 3 CCD camera, so for days I have been looking at the GL2 or Sony 2100. Of course the cost is much higher. I almost ordered one but I was concerned about the Canon turning off power in the middle of recording and the size of the Sony. I kept hearing about the Xi being one of or the best single ccd camera out there so I went to this forum.

I tape school events but any money I receive goes back to the school to help the teams. So the DVD's I create are really just to learn from and perhaps give them a keepsake.

I ordered the Xi with a UV filter and extra battery from B & H Photo yesterday so I am looking forward to using it soon. I think I made the right choice.

Thanks to the people of these forums for their advice. John

Welcome to Dv Info and congratulations on your purchase. Keep us updated on your experiences with the Optura.

I've just about decided that I want to buy an Optura 40, but notice that a lot of the websites out there are posting that it and the Optura 30 have been discontinued. They are to be replaced by the Optura 300, 400 and 500...

Of these new versions, I've yet to see one with the accessory shoe, which is funny because a lot of the reviews that I've read on these suggest getting a light to put in this slot for use in low light areas.

Does anyone have any clue if this is a growing trend?

Also, does anyone have any horror stories to tell me about the Optura 40 before I purchase it?

Thanks in advance...

Nancy

>>>optura 30 have been discontinued. They are to be replaced by the Optura 300, 400 and 500...<<<

no the optura 30/40 have been updated by the optura 50/60, one major update was the addition of an optical image stabilizer...the advanced accessory shoe is still there...

you can read my review of the optura 60 here http://emptyloft.com/optura60/

You read a lot about what dealers to buy camcorders from. How was your buying experience……these guys did a great job……good rating at resellers.com……etc….etc.

You also read about people returning cams due to various reasons….made noise…..banding problem….just didn’t like it….etc….etc.

So what happens to those returned cams?
The online sellers make a point of returning every single thing …right down to the bubble wrap.
Does the factory care if they get the bubble wrap returned?
Does the factory ever even see these returned cams?
Are they just rewrapped and then redistributed for sale?
If I return mine today…..can you buy it tomorrow?
Are there any laws to prevent this from happening?
Just some things to think about.
Does anybody have any experience in this area that could help answer any of these questions

Hi Frank,

The answer depends on which dealers we're talking about.

Unauthorized box houses that deal in gray market goods might simply resell the same returned item. However, authorized Canon dealers (such as our sponsors) will send returned items back to Canon factory service, where they are repaired, and eventually resold as "refurbished" through fairly limited channels. It can be difficult to find refurbs, but they're usually offered through the company store or occasionally as closeouts through better-known channels -- always marked as refurb, though. Hope this helps,

I noticed that the accessory shoe on the Optura 60 gets hot, hotter than I would expect, after running for a few hours. I was importing/printing alot of footage last night and noticed that when I grabbed the camera to put it away that it was hot to the touch.

Anyone else notice this? I'm wondering if it's because of the viewfinder's backlight?

I've noticed that happens to the bottom of my Xi when I'm running the tape mechanism a lot (downloading / long shoots etc.) Haven't noticed the hot shoe yet, but I'll bet it's the same thing.

I don't notice it as much during the summer, for obvious reasons.

Does anyone have an answer to this question? Sounds like a good question.

Thanks.

I really liked the gigantic Lenmar batteries we used to use with our GL1 and would gladly buy the same brand for our Optura 60, but they don't seem to be made. Or do they? Perhaps I'm just not good at searching B&H's Web site. Can anybody direct me to a link? What's another good brand? How's Power 2000 or Impact?

Haven't seen the Lenmar batteries either, but the Power 2000s are good 3rd party batteries. I've used them and they perform well. Also picked up a few CTA batteries someplace and they're decent too. Don't know anything about Impact batteries.

I'm still getting my head around Canon's new battery product numbers, but I haven't seen anything that's equivalent to the BP-535 series. It looks like the highest capacity is the BP-2L14 series.

And I'll just quote Chris for the rest of the post:
The NB nomenclature comes from the still photo division. The BP nomenclature comes from the video division. It's still the exact same battery type either way, with minor variations in power. See my page at http://www.dvinfo.net/canonoptura/articles/optura40elura70-2.php#batt for a brief overview.

I have an Optura 20 and am looking at upping the battery pak.
The BP535 seems to be the biggest. There are "replacement" ones available but I am not sure about reliability.
http://reviews.cnet.com/CTA_BP_535_Lithium_Ion_Battery_Pack_7_4v_4500mAh_replacement_for_Canon_BP_535_Camcorder_Battery/4505-6447_7-31043119.html

Anyone got one and liked it?

I had a CTA BP-535 for about 2 years before I sold my Optura Xi. Worked great, never let me down. My friend is still shooting with it, and she says it's still going strong.

If you're hesistant about the brand, search the board for Power 2000 and Lenmar, they're popular 3rd party battery brands.