Heath McKnight
May 25th, 2004, 10:45 AM
Hey all,
I sent an email to Murph about this stuff, and he said it's worth posting on DV Info, so here ya go.
For shooting HD events with the HD10, here are some of my recommendations. One caveat, I haven't done many events (I am mostly a filmmaker), and when I have, I had to go DV. But these recommendations should help.
And if you want to add or correct me, GO FOR IT!
1. Lavs...I've been using the Sony ECM-44B (I think, it's in my car right now, so I can't verify it). Find a good Sony lav for $150 and it should be the ECM-something or other. :-) And a good Shure shotgun mic is nice.
2. I'd recommend a nice Arri light kit, with four nice lights.
3. USE A CAMERA LIGHT! The HD10 NEEDS as much light as possible! So use a mountable camera light. When shooting, make sure it's not too dark, because the HD mode will likely suck. If you're gonna sell them on HD, tell them it's gonna have to be well lit. I would just have the places the wedding and party are in keep the lights up. And for the party, have that camera light there (maybe set up to small lights, if it's okay, on either side of the groom and bride to light them good. But make sure it's cool with the church, etc.). Hook a wireless lav to the person performing the wedding and the groom. But you can ask on the microphone board here.
4. And, as many recommend, buy a tripod you can grow with. So your HD10 may look ridiculously small on that large tripod, but your JVC ENG-style/24p HDV camera won't.
heath
I sent an email to Murph about this stuff, and he said it's worth posting on DV Info, so here ya go.
For shooting HD events with the HD10, here are some of my recommendations. One caveat, I haven't done many events (I am mostly a filmmaker), and when I have, I had to go DV. But these recommendations should help.
And if you want to add or correct me, GO FOR IT!
1. Lavs...I've been using the Sony ECM-44B (I think, it's in my car right now, so I can't verify it). Find a good Sony lav for $150 and it should be the ECM-something or other. :-) And a good Shure shotgun mic is nice.
2. I'd recommend a nice Arri light kit, with four nice lights.
3. USE A CAMERA LIGHT! The HD10 NEEDS as much light as possible! So use a mountable camera light. When shooting, make sure it's not too dark, because the HD mode will likely suck. If you're gonna sell them on HD, tell them it's gonna have to be well lit. I would just have the places the wedding and party are in keep the lights up. And for the party, have that camera light there (maybe set up to small lights, if it's okay, on either side of the groom and bride to light them good. But make sure it's cool with the church, etc.). Hook a wireless lav to the person performing the wedding and the groom. But you can ask on the microphone board here.
4. And, as many recommend, buy a tripod you can grow with. So your HD10 may look ridiculously small on that large tripod, but your JVC ENG-style/24p HDV camera won't.
heath