Hi folks,
Check out this link: http://www.indiedolly.com

This dolly is going for a price of $550 and is supposed to be on par with the heavier more expensive dollies according to an article/review in DV mag which is linked on that site.

Anyone use this before? If so, is it worth it?

I'm curious as well. Looks pretty affordable. Anyone tried this?

I use the cinekinetic Pocket Dolly, very simple, uses any old plywood board and , and works perfectly with a full sized camera rig and operator sitting on in, but only in straight lines, and is about $450. see cinekinetic.com for details.

Has anyone used the new ZGC Indie Dolly?

http://www.zgc.com/zgc.nsf/c7a682995edb4e7585256b4d001ebd57/572afae6ccd0021c85256d280060a878?OpenDocument

Anyone using one of these?

http://www.indiedolly.com/

How do you like it?

Hello. This is my first time posting here. I've been an avid "listener" for years.

I was recently on a show where the Canon XL2 was mounted to a Cartoni Focus head and Indie Dolly sticks. I had heard from the director, several weeks ago, that he purchased these sticks from the Indie Dolly guy and that I had to see them... well seeing is believing. These sticks are incredible! Extremely durable, practical and stylish!

I am about to order some of the light weight sticks from him. He advertises $600 (available in three sizes) but his lightest weight ones are $300! And I'm telling you I've worked with sticks twice (even three times) the cost and these indie dolly sticks out perform them.

Anyone out there contemplating purchasing these sticks?

Highest Regards,

Daniel Riser

www.treasureofthetemplars.com

Looks quite good, I'm tempted to try it out.

I contacted them today and it turns out their office is over at Glendale, CA. I'm trying to setup a time next week so I could bring my tripod there and try it out. I have a Miller DS10 by the way. I will post my impressions once I do that. I'm excited. It does seem like a solid dolly at a very affordable price.

I contacted them today and it turns out their office is over at Glendale, CA. I'm trying to setup a time next week so I could bring my tripod there and try it out. I have a Miller DS10 by the way. I will post my impressions once I do that. I'm excited. It does seem like a solid dolly at a very affordable price.

I ordered one at NAB in April with a supposed 3-week lead time. They still haven't shipped it. It's nice and works well, but I'm cancelling my order right after posting this message. Best I can tell, they have ONE. Not a couple, not running low. ONE. And the owner/designer flies around the country demo-ing it. Since I'm about to cancel, maybe one of you can order his demo.

hello dennis,

i have never used any dolly, but have a concern by looking at the picture.
i am a heavy guy (fat) all my weight pluse the weight of the camera is on one track only. in the pictur inside track, i am afraid i would tilt over incl. the dolly system.........

dolly users ....help me out..

greetings

Hey everyone, I just went to their warehouse and I met the designer. The guy is really friendly and he showed me the various components. He didn't have a working demo to show but the components I saw were very solid. My tripod works perfectly with it and they've made several improvements from the older model. He also told me that the price will be going up soon so I'm definitely getting mine in the next couple weeks.

I'm sorry that you have to cancel Dennis. The guy told me that they just received the shipment late last week. I saw all the boxes and he even opened one. He did say that there are quite a few angry customers who has been waiting for months. Maybe one of them is you :P

I also ordered mine at NAB after seeing the demo model they had there. It's been four months but it arrived a couple days ago. I put it together (it goes together very simply and fast) and it works great. I got both straight track and curved track. The system packs up nicely into 3 (2 if you only get the straight track) very nice durable (we'll see as I'll be traveling with them) cases. I was told they would weigh no more than 45lbs per bag but the main component weighs at least 55 lbs...an excess weight charge when flying!!

This system is very well manufactured and very solid. The center piece is heavy which ads to the smooth tracking...and it comes with a seat...though not the most comfortable set up, especially if you are big. The track can be configured in regular mode or tabletop mode which runs the rails closer together. The rails are very strong and much better than any of the flimsy micro dolly systems I've seen. The only thing I don't like about it at this stage (and I've not really operated with it yet) is the footings for tripod placement. They have been specifically designed with the Indie Dolly tripod in mind. I use a Sachtler and the feet do not fit securely in the footing and will need to be secured by a manner I haven't thought of yet (bungee??velcro??). The footings can be removed so it would have been easy for them to design interchangeable footings that could be purchased for the type of tripod you use.

I'll be using this on jobs very soon so I'll let you know how it performs in the real world soon.

I think a plastic pipe dolly using scate board wheels is hard to beat for price and simplicity.If you make the trolly collapsable it can be packed into a carry bag.If you need to travel by airline you can always drop into a hardware store and pick up some pipe at your next location,its cheap,probably less than the cost of eccess baggage .Just remember to take along your own pipe joining slugs.Forget the seat setup,you still need to get someone who can push the unit smoothly,and more wieght on the trolly plus an extra person usualy mean's more noise.

You're right, skateboard dollies do work although in my experience with them, they can be quite limiting, noisy and difficult to set-up on non flat terrain (plus you've got to go shopping on location to pick up PVC pipes). I needed something a bit more on the professional side that would be guaranteed not to hold up my work flow. I think the Indie Dolly will be it.

hello dennis,

i have never used any dolly, but have a concern by looking at the picture.
i am a heavy guy (fat) all my weight pluse the weight of the camera is on one track only. in the pictur inside track, i am afraid i would tilt over incl. the dolly system.........

dolly users ....help me out..

greetings

Hey Karl, I went back to meet the designer again and they claim that the dolly would be able to hold 350-400 pounds of weight (although it would be rather pushing it). They are also planning to add a platform that will be etched between two of the wheels to make the system more stable. There's also going to be a cushioned seat for future versions.

I also ordered mine at NAB after seeing the demo model they had there. It's been four months but it arrived a couple days ago. I put it together (it goes together very simply and fast) and it works great. I got both straight track and curved track. The system packs up nicely into 3 (2 if you only get the straight track) very nice durable (we'll see as I'll be traveling with them) cases. I was told they would weigh no more than 45lbs per bag but the main component weighs at least 55 lbs...an excess weight charge when flying!!

This system is very well manufactured and very solid. The center piece is heavy which ads to the smooth tracking...and it comes with a seat...though not the most comfortable set up, especially if you are big. The track can be configured in regular mode or tabletop mode which runs the rails closer together. The rails are very strong and much better than any of the flimsy micro dolly systems I've seen. The only thing I don't like about it at this stage (and I've not really operated with it yet) is the footings for tripod placement. They have been specifically designed with the Indie Dolly tripod in mind. I use a Sachtler and the feet do not fit securely in the footing and will need to be secured by a manner I haven't thought of yet (bungee??velcro??). The footings can be removed so it would have been easy for them to design interchangeable footings that could be purchased for the type of tripod you use.

I'll be using this on jobs very soon so I'll let you know how it performs in the real world soon.

Hey Ken, I just got mine yesterday. I built the whole thing in their warehouse and I was really impressed with the smoothness. The seat could be wobbly but I'm sure this will be remedied later and the addition of a platform would definitely stabilize it better. I agree with you that the bags are nice and I also got both kind of tracks. The footing is definitely a problem they need to address. I have a Miller DS10 and am having the same problem with you but overll this is definitely a really solid dolly.

I used the dolly on a job today and just wanted to let you guys know it worked flawlessly. It set up very quickly and packed up very quickly. The client was pretty impressed with it.

any more recent feedback on this product? especially using it on rougher terrain. i'm giving it some consideration. any viewable footage?

I posted a test of the Brevis35 in low light that I recorded doing dolly shots with the Indie Dolly. There are accompanying fotos as well. It wasn't set up on rough terrain...unless you consider a kitchen to be a dangerous area!
http://www.dvinfo.net/conf/showthread.php?t=74772

Any more news? I am seriously considering this purchase.

Did you guys buy directly from the vendor?

I just received my Indi-Dolly yesterday (with 12ft straight and 13ft curved track). I'm hoping to get a test in soon, so I'll comment on it's performance. Just a note: I'll also be using the Micro35 (M2), with the Advanta-Jib attached to the dolly. I'll also try straight shots using only the Z1U.

I'm waiting for a HD monitor (probably from Nebtek) to really test follow focus with the Indi-Dolly, so those test may have to wait.

I'll post more once I get a chance (my schedule is tight right now, but whenever I get a new 'toy' I have a hard time not playing....)

Todd

Did you guys buy directly from the vendor?
Yes, I saw the product at NAB this year and got on the waiting list for it. They contacted me directly when it became available. You can contact them directly through the website.

I used the Indie Dolly on a Dateline job yesterday. It worked very well and the producer was pleased. Here's a couple of pics showing how the set up looks. I have the seat attached and the handle to push/pull is the silver bar attached to the center of the base of the dolly. It was very simple and straight forward to set up.

I own one. It's a great system. It's not $500 as suggested in the first post but rather $1099 and another $500 for the tracks. But it's a great system at that price. The tracks are extremely strong.

I was a Cinegear Expo this year and and the indedolly system was there, very solid and smooth, sturdy and compact. very nice people at the booth also recommend for the pice. just my 2 cents

So let me ask, is this currently the best bang for the buck so to speak? I am just getting started looking and this seems to be a good product for a good price, what is the nearest alternative and what are the benefits or drawbacks of each?

Check: http://www.cinemagadgets.com/dollies-tracks-dolly-tracks-c-73_89.html

They sell dolly track that looks a lot more professional than the one you are talking about, yes it's more expensive, but not that much, you can get 12 feet for $600.00 if you by a 10 feet and a 2 feet. (I know that the 10 feet track is not going to be portable, but it's just an example, you can buy three 4 feet tracks for $780) You're gonna pay around 40% more money, but the track is gonna last forever.

Now, about the dolly itself:
http://www.cinemagadgets.com/dollies-tracks-dollies-accessories-c-73_41.html

They have a lot of options, you can buy an already built dolly, or buy the pieces, add some plywood and you'll end up with a REAL dolly. Again, maybe you end up paying a little more. but you will end up with a far more professional setup.

Just my two cents, please let me know what you all think.