Marcia Janine Galles
March 8th, 2004, 10:02 AM
Hi all. Because of what I've read in current threads on the audio boards (and a search of the same) I've decided to go with the MixPre to monitor my levels and be able to boost my field audio w/o increasing the camera noise (if the levels are low). But Marco (on the audio board) mentions a DV Mag. article on the MixPre where it says that the gain on a camera should be turned down so that a 0dB tone on the MixPre reads -20dB on the camera itself. Given that the audio on the DVX is noteably better than other cameras, and the DVX isn't specifically mentioned, is this adjustment nec. with the DVX as well?
One other thing, and I apologize in advance for my ignorance (but I'm learning!), whereas I use "mic in" when sending the signal into the DVX directly, if its coming via the MixPre I use "line in" instead, correct? Seems like that was the only "out" option with the MixPre anyway.
Thanks guys,
Marcia
One other thing, and I apologize in advance for my ignorance (but I'm learning!), whereas I use "mic in" when sending the signal into the DVX directly, if its coming via the MixPre I use "line in" instead, correct? Seems like that was the only "out" option with the MixPre anyway.
Thanks guys,
Marcia