Thanks for the info, John. I am still looking around, mainly in the 'used' market. I have my eye on a Rolls MX442. I, of course, don't want to sacrifice quality for price...but the 4 XLR inputs on the MX442 are pretty appealing. And I can pick one up for under 800 bucks used. I am going to see if anyone has any insight into the MX442 on Now Hear This. But I am also definitely curious to see how much you picked up your Wendt for, and where.
Ben

850.00 plus shipping from 70744 zipcode

package is 3800.00 plus shipping

pd-170 comes with camera, pelican case, wideangle lens, telephoto lens, rycote wind screen for on board mic, drum hours are 8x10 price for camera is 2750.00 plus shipping bought new in jan of 05

sennheiser and rycote are 400.00 plus shipping

sony wireless system is 850.00 plus shipping

interested in any and all....please email or call 352.222.0720


cheers
-adam ball

Hi John

Is this unit still available?

Thanks
Martin


OOOpps

Looks like I missed your last post. So you are keeping it!!!

I too have an RTX100 and am pleased. I was looking for one for my daughter's computer.

Martin

Looking for a Matrox capture card for my daughter's computer. I am familiar with the Matrox as i have it and am pleased.

Thanks
Martin

Hello,

I have a Gl2 thats Im selling for parts as is. It took a fall off a table that ripped off the black plastic piece that the bayonett sunshade, the mic is loose but works fine, both zoom rockers went out, the internal speaker only works sometimes, and the heads could use a good cleaning or even some alignment.
All i really can say is that it powers up good and stays on without telling you to eject the tape. =)
I am not really sure how to go about pricing it, make me a offer if your intrested or know someone that could use the parts, I can take sine photos if you would like.

thanks

Martin, I will consider selling if the offer is reasonable.

email me at pidv@bellsouth.net if interested.

Martin,

I am willing to sell my RT-X100.

email me at pidv@bellsouth.net if you're interested.

i would be willing to just buy the softbox, if your willing to sell it .

e-mail sent

Hi to Manchester

If the lens has a 58mm thread it could be of interest to a lot of others. I have a sony PD150 that also uses 58mm, for instance. No i do not need one as I already bought.
Point is that if you highlight the thread,as well as what you use it on, you might widen your market.

Good luck

Martin

Hello
Will the unit play back tapes? Rewind, pause?

Thanks Steve

Hi Martin...

Don't take this the wrong way mate, but...

...what a strange post...?!!


Not really sure what point you are making there..!!

Well....as the thread title says....its a CANON WD58H wide angle lens.

So....it has a 58mm thread and made by Canon...for anything with a 58mm thread...

...?!!

I have an XM2 (GL2) that I've used it on...

..?!!

Hey everyone,

Selling my PV-GS400 + accessories as I just bought a digital SLR and am short on cash. I bought the GS400 about 6 months ago, it's been through about 10 tapes. There are some superficial scratches on the outside of the LCD monitor (on the body), other than that, it's in like new condition.

Also will include:
- Rode Videomic in like new condition
- Raynox HD-6600 Pro .66x WA converter in like new condition
- 256MB Kingston SD card (for stills)
- 72mm petal hood for the WA
- Large 2500mah batt
- Tiffen .6ND
- 43-58mm step up ring
- and of course, everything in the original box + the box

I paid over $1600 for the kit and will let it go for $1200. Please e-mail me or post here if interested. I can send pictures and any additional information.

Thanks!

Dave

besides the camera do you have anything else ?

Selling my XL2. Need funds for other interests. It might have about 1 hour or so on it. I never really taped anything. I still have the original box and other little trinkets that came with it, etc. Asking $4000 shipped OBO.

Hey everybody,

Looking to get rid of my Canon GL2. I would like to invest in a nother camera later on. My Canon GL2 is a little over a year old. Great condition and well taken care of. No scratches, the lens is in perfect condition.. I always used a UV Filters to protect the original lens. The package is going for $2400 and I will only accept Paypal as a method of payment. I have pictures upon request. The packages includes the following...

- Canon GL2 Video Camera
- Canon Video Lights
- Canon Extended 8 Hour Battery
- Soft Cover Bag
- Wide Angle Lens
- Standard Canon Battery
- All the chargers cordes and AV
- Original Box and Mannuals
- 8MB SD Card

Let me know if you are at all interested. You can contact me at awooday@hotmail.com

http://www.dvinfo.net/conf/showthread.php?t=5772

The street price is down to about $3700 for a new one... probably will be $3500 before the end of the year...


ash =o)

This is what Optex said:

"I had the technicians look at this and the pictures from your client and they thought that the quality was probably very similar to other units that they had seen or that we have in stock. Unfortunately the anamorphic process at the front of the lens does tend to leave some picture defects - either magnified from the normal lens or introduced - compared to the more normal practice of rear of lens conversions."

They gave me the choice between having it sent back to me OR having it credited. That was an easy decision!

I really think it's very professional from them to offer me my money back.

So, consider this item closed. Sold to the highest bidder, the factory itself!

Hi Andrew,

Presume that's $2400 Canadian? I think that price would be a bit high in US dollars. I'm sure you'll have a buyer in no time. Best wishes.

Received rather little use. Purchased in a larger package and I already have my own lighting setup so this is available. If I cannot sell it as a whole kit, I would listen to offers for one light/with bulb and stand. BH sell this kit for 500US. These are great lights for a reception (no need to bring an extra softbox) or any sort of location lighting where you have access to power. Once I show couples the difference one of these lights can make for their video, they nearly always consent to having it used at the reception, and it make the job much easier. I'm looking for $340 for 3 lights with bulbs (low hours on all, like 10 hours kind of low), as well as the three lights stands. Lights have built in diffused and they bounce off the back. Just throw it on the stand, plug it in and point.

This is the info from B&H.

Smith-Victor SL300 Softlight Tungsten Light Kit - consists of: 3 Softlights 600W, 3 Lamps, 3 Stands and Light Cart on Wheels - 1800 Total Watts

A mini-soft box/quartz halogen light. This new light gives you up to 600 watts of soft, diffused quartz light from a concealed source. Unit comes with a DYH 600 watt quartz lamp.

Key Features

•Perfect size
Compact size, plus instant set-up makes it perfect for any location or studio

•Long lamp life
High/low switching gives you added flexibility and conserves lamp life

•Diffused soft light
The light bounces out of the soft, etched reflector for diffused light without the need for accessories

Anyone?? Before i throw it on ebay?

...actually, It doesn't take much to find one for 3000 new if one does a little searching...

I'm new at this whole thing but was looking for a soft light solution. All I have now is cobbled together (some dishlamps, worklight etc.) Is this kit good for studio lighting. Like would this meet most of my indoor shooting needs?

I'm assuming this package comes with everything listed including all necessary power cords, etc?

$340 sounds reasonable. Can you pay shipping?

Thanks!

Andy Stewart

hi Nick

nothing taken the wrong way. Your comments are exactly what I meant. Too often when one says someting is a "name brand" widget, people feel limited to that brand without realising it might work on many others.

anyway, best of luck in selling it

Martin

Andy,

This is a rather versatile setup and has lots of power, the 1/2 or full power option is great. You might want to make another simple diffuser out of a translucent cloth to soften it more. Another option would be to buy or make a small reflector that you can place on the other side of the subject. In all honestly, I think as a complete studio setup we would be better to mix this set with my set. I could offer you two of this lamps, with stand, cords etc, and one of my 250W lights that has a softbox and allows you to go from 1/8th power al the way up to full. Combining that one, with these two, will give you many different combinations for the strength of the light and allow you to be more creative. The kit comes with everything original except for the case, instead of the large plastic case, I have a large nylon bag made for a lighting setup. I can keep the price the same and switchone light for a softbox and one of these other lamps. I can also pslit on shipping if that works for you. Feel free to contatc me directly for my home number to discuss.

Canon VL-10Li video light

Maxell minidv rewinder

Azden SGM-X shotgun mic

SunPak Twin V102 dual battery charger that works with canon/sony batts

Please make offers. No reasonable offer refused.

angler74@surfglobal.net

yes, tape drive itself is working great.

(edit)

But i wouldn't trust the heads as a play back deck, I'm not really sure if its just dirty heads or if they actualy need to be ajusted. When i first read this, I was thinking about the gears as replacement parts. I Wouldn't feel right selling it as a working camera or playback deck.

thanks

Eek...

OK....like I said, OBO.

Hey Ladies and Gents
I have for sale a Canon EF 100-300mm 'L' series lens. I'm offering it cheap because it is in rough exterior shape. The barrel body has lots of scratches, and the front glass has a 2mm long scratch in it as well. Yes, that is a scratch IN the glass. No, I didn't cause it. If it doesn't sell here in a week or so, it goes on Ebay.

So the bad news is a scratch and rough exterior, but here is the good news:
That scratch does not turn up in photos (that I have noticed).
The lens is in good working condition.
It takes sharp photos.
Comes with a UV filter (if the previous owner had shelled out for one, it wouldn't be scratched...)
It is pretty cheap for L series glass.
I am flexible on the price.
I am open to trade offers (looking for a Panasonic FX9 still digicam, better video tripod, or whatever.)

I can provide sample photos taken with it for you to inspect as well as pics of the scratch if you are seriously interested, just email me.
I'm selling it because I bought a Sigma 50-500mm lens.

Here is a pretty honest review of the lens:
http://www.photozone.de/2Equipment/reviews/canon100300.htm

My asking price is $350us/$420cdn. The ones I have seen for sale on Ebay (in mint condition) have sold for about $400-$500us. Shipping will probably be $10.

Yes, I take Paypal from forum members.

Thanks!

Nick,

I think Martin is just suggesting more explicit language may expand your market and sales potential... some may not know what the thread size of their camera is.... believe it or NOT!!

Thanks guys

Advice taken on board..

Hopefully, my reply to Martin (although tongue-in-cheek) will have made the detail of the item a bit clearer.

Thanks for the help.

Nick

Email Sent

Included in this sale are as follows:
1 JVC HD10U Professional HDV Camcorder & Pro Handle w/XLR Mic inputs
2 JVC BN-V428U Li-Ion 4 Hr. Batteries
1 Maxell 2Hr Battery
1 JVC BN-408U OEM Battery
1 Energizer ER-C620 Battery
1 JVC OEM Charger (charges all above batteries)
1 Set Video Out cables
1 Original Mpeg Edit Studio CD-Rom for Windows XP and serial No.
(software allows editing and capture of HDV from JVC camcorders)
1 52mm UV Filter (filters out UV haze and keeps lens protected- can be left on at all times)
Here's a lin with photos------>
http://www.stevenunez.com/jvchd10u/index.htm

All is in mint condition. Local buyers are welcome to take a look at it personally and check it out.

Paypal verified or will accept checks or M.O.'s
email stevenyc1@aol.com for more info

I'm looking to buy a JVC Everio MC500.
__________________
Steve Nunez (NYC)
www.stevenunez.com

I'm glad to hear your intentions were good Martin, but to tell you the truth, I couldn't figure out what the heck you were talking about either.

looking to purchase a use Rifa-lite softbox 44..

I just realized that the price for this software has gone down since I purchased it back in Dec 04, when it was $495. Man that really bites. Oh well.

I'll reduce to $150, but no lower. With the retail at $295, that almost 50% off the price. Any takers?

interested in any and all....please email or call 352.222.0720


cheers
-adam ball

Hey Adam,

Did you ever find a duplicator. I am pricing to build one for myself. Didn't know if your finding one worked out well or not.

Interested, but hmm - the link on BH show the DV 44 kit having the Rifa 44, Tota, Omni and Pro lights. Can you confirm that your kit is different from the one listed on BH? Thanks.

Mic is now sold.

canon light, maexell minidv rewinder, and battery charger are still available. No reasonable offers refused.
thanks

angler74@surfglobal.net

Sorry, I just sold it.

I recently picked up a couple of Schoeps so I need to sell my two Audio Technica hypers. I actually have two AT-4053a hypercardiods that are like new. I've used them very little over the last few months but they were terrific when I did. One of the best investments I have made for sound. They come in the cases with foam windscreens and mic clips. I also have a 4051a capsule that allows the hyper to be swapped for a cardiod to give a little wider pickup. These mics sound great and work really well for interior dialog. They sound very close to the Schoeps to my ears, but the Schoeps are a little quiter. Anyway, I paid around $400 each for them less than 6 months ago and about $180 for the extra cap. Looking for offers.

Matt

.. and your question is? . .

Price drop: $1100 OBO.

Is this item still 4 sale.? I sent an email but have not recieved a reply.
Steve

can I pay with paypal to protect myself, can you send pics, etc?

Shot with the HD10U:
(H.264 codec/compressed)
http://stevenunez.com/videos/mantisjvch264.mov

(QT HDV codec- full quality)
http://stevenunez.com/videos/mantisjvchd.mov

Hi,

I'm looking for a good condition vx2000 or gl2. Looking to spend around $1400 - $1500. If anyone has one that they are trying to sell please contact me at bakerism@gmail.com

Thanks,
Jason
Toronto,ON