i've found the 501 to be more than sufficient for the DVX, especially with the 515mv legs.

Steve, i do have people in the whole package, but i'll let you know if i can find a buyer that Doesn't want the tripod, and we'll be golden.

Bill, thanks for the compliment! i was the DP on BROKEN, so i can't take credit for the acting, but i'll take credit for the visuals!

Hey Roze, I just sent you an email.

Thanks :)

just wanted to share that im still hunting for a camera, i have recieved a few replies and thank you to those just hopping to see if theres any other choices
thanks again

hello norman just curiuos as to wether or not youd be open to offers on your camera , im interested just a little outa my price range
mekhael_trepanier(A)hotmail

Sorry but the price is about as low as I care to go. I think it is a good deal and any lower I can sell it to a vendor for resale.........Thanks for the inquiry.

Email Billrankin@aol.com

Canon GL2
- Excellent condition, (kept in aluminum case - included)
- Low hours (estimate 70-90 hours)
- All original equipment included (cables, hood, charger, etc)
- Additional battery packs (Qty 2) BP-945 Canon batteries
- Directional mic DM-50
- Wide-angle lens WD-58H
- Extended transferrable warranty until Feb. 2007 (Frye's Electronics)

This camera has been pampered. I have taken very good care of it and there are no scratches on the body or lens. There is a burnt pixel in the monitor but it has no effect on video. This can be fixed by the extended warranty.

THIS IS AN EXCELLENT CAMERA!

Orig. cost $3,000.00 (including accessories)
Sale for $1,500.00 or will consider exchange for Sony PD 170

The Monitors Are Sold.

Thanks for your enquiries.

$1000 + shipping

I have a brand new 10 pack of Sony PDVM-40N DVCAM mini tapes for sale sealed and boxed. These are NTSC tapes that will work in any DV camera or deck. You will get an hour at regular DV speed or 40 minutes at DVCAM speed. They have the professional plastic cases as well.

B and H 10 pack price $129.90

The Tape Company 10 pack price $117.10

I will sell and ship to your door for $80.00

That's about $45 to $57 less than B and H or the Tape Company for the same thing. Please don't ask me to sell the tapes individually. Shipping is for lower 48 US/UPS ground or USPS only.

Will Boggs
DustBowl Productions
dustbowl@wilnet1.com

I have a brand new in box Gitzo 1380 Pro Video Head for sale. The retail price is $899.95. I am selling it for $850.00. I can do Paypal or check. However, if sending a check, I will not ship the head until after the payment clears.

Let me know if you are interested.
Darren (http://www.dvinfo.net/conf/sendmessage.php?do=mailmember&u=12400)

Picture of Gitzo1380:
http://www.bogenimaging.us/fileindexednew/module2/item/file0005405.gif

I have two new extra handles for the Gitzo 1380 pro video head. I'd like $25.00 per handle.

Let me know if you are interested.

Darren

Picture 1 of handles:
http://www.extremeshot.com/ebay/IMG_0499a.jpg

Picture 2 of handles:
http://www.extremeshot.com/ebay/IMG_0500a.jpg

Final price drop before eBay.

$425 with FREE SHIPPING!

Hi Will,

I just sent an email re: DVcam tapes.

Thanks

Chris

The Porta Brace TQ-30 Quick Tripod Case is a 30" long slim-line,
light yet strong case for carrying a tripod with a head and
accessories.

I bought this bag not long ago, but never used it thinking
I was going to travel a lot. So it never happened.
At this moment, I'd rather invest this money on a
lighting kit.

Porta Brace TQ30 (http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=283611&is=REG&addedTroughType=search)

US $140 + shipping

Did I mention is like new and that I have pics?
Voila

Why are you moving over to the Canon?

Not really sure if I am yet, but I do more work shooting on the XL2 with the mini35 adaptor, than with the DVX. So I'm not really getting my money back on the Panasonic.

I'm in the market for a used FX-1 or Z1u. Please specify if it's grey market
or US model. I may also be interested in the camera itself without any accessories. Thanks.

Forsale:

Bought it from a member a couple of weeks ago for a out of country shoot.

The backpack is basically brand new, and fits all larger cameras (gl-2) and all my extras pefectly. Vey secure and protects it all greatly.

No marks, never been around smoke. Still have orginal tags, and reciet.

Will sell for $130 shipped or best offer.

email:
p.smith@torquevm.com

Dan,
I may be interested in selling my Z1. It's a low hour camera with the following accessories:
2 non-oem 7800mAh Batteries
1 polarizing filter
1 UV/Haze always on lens
1 Storm 2270 Case for Cam & Accessories
1 Varizoom Stealthzoom focus/zoom controller
1 Nikon Lens Pen
All factory included accessories (I think I still have the box, too)
This is NOT a gray market camera.

Here is a pic http://www.914club.com/bbs2/uploads/post-11-1122321306.jpg

email me if you are interested:
Sean at SeanLee dot tv

-sean

I am in need of an Imac G5.

20-inch
2.0GHz
1+ MB Ram

20-inch widescreen LCD
2GHz PowerPC G5
667MHz frontside bus
512K L2 cache
1GB+ DDR400 SDRAM
160GB Serial ATA hard drive
Slot-load 8x SuperDrive (double-layer)
ATI Radeon 9600
128MB DDR video memory
56K internal modem
Wireless
DVD/CD Combo Burner.

The specs you are quoting apply to the 'just released' Imac G5. I doubt you will find anyone parting with a used one since they won't have had time for the new to wear off yet. You will likely have to buy it new for $1799.00

Good Luck,

-gb-

Charles, what did you think of the JR? We've been experimenting with hand-made rigs (I have access to alot of engineering/machining talent) and are trying to decide if we want to build something better or if we should just buy off-the-shelf. The price is right for the JR, but I wasn't sure if we could do better ourselves.

We're shooting with small cameras now and the biggest thing I can see us using in the near future is a Sony HDR-FX1.

(if you posted something about this elsewhere just a pointer in the right direction is appreciated, I looked but I didn't see anything).

Jason;

I would point you towards the homebuilt stabilizer site, http://homebuiltstabilizers.com/, if you haven't been there already. A system with a vest and arm might serve you better in the long run than a handheld system. The primary reason I could see to get a JR rather than build something yourself would be that you consider the hours of building and tweaking to be worth less than what it would cost to buy the JR.

Thanks Charles, homebuiltstabilizers.com has definately been a source of inspiration for the work we have done so far :)

We're getting to a point where our productions are getting large enough that we don't have as much time to build everything from scratch like we used to, so I'm really on the fence with this one. I know that experience plays a large part of getting the most out of any sort of stabilizer so I was curious how you felt about the JR and what sort of results you were able to obtain with it.

Do you have any examples of work you've done using the JR or was it more for personal/private use? You mentioned Zach borrowing it, is the work he did with it avaliable for viewing?

Thanks again Charles.

I hadn't used the JR for many years, which is why I sold it. The couple of jobs I did with it were in the early '90's, don't even have copies of it. I will say that even as a big-rig operator where many of the skills were transferable, the JR did require me to learn new skills and keep on top of it.

Zach borrowed my JR to do walk-throughs for a music video he was directing. He couldn't get either of his DV cameras to balance (I had warned him about that process) and thought it was a pain in the arse!

If you spend plenty of time with the JR you can make some great shots. It does require constant fiddling for balance, but it does have the quickest controls for balance amongst its competitors (I think--I haven't kept up with all of the other rigs out there).

Thanks again for the info Charles, if I end up in LA sometime I owe you a coke :)

Next time you talk to Zach tell him we loved Garden State.

The GL2 has been sold.

I have a ....

SHURE Wireless Lavalier UP-14 & SHURE WL 5/B SHURE UP Wireless System w/ wireless Lavalier microphone Contains 10 groups of compatible channels. Magnet mount, dual tie clip, swiveling lapel clip, pin mount, carrying case Will Email pictures 410-984-1025

LOWELL DV CREATOR LIGHTING KIT 55w/Lamps

LOWELL DV Creator kit contains Rifa Lite55, Pro Light, Omni- Light Barndoors,Umbrella, Gel Frames, Flag, Light Stands and hard carrying case Will Email pictures 410-984-1025 dawn7dave7@msn.com Price open for negotiation... All fair offers considered.

(psst... post your price please. thanks!)

SHURE Wireless Lavalier UP-14 & SHURE WL 5/B SHURE UP Wireless System w/ wireless Lavalier microphone Contains 10 groups of compatible channels. Magnet mount, dual tie clip, swiveling lapel clip, pin mount, carrying case Will Email pictures 410-984-1025 dawn7dave7@msn.com All fair offers considered.

Hi, I can't find this model on the web, do you have a link to a site where I can see pics prices of new ones? Thanks

www.dvcreators.net

Great site with some good informational videos on products.

KW

is this the kit?

http://www.lowel.com/kits/DVcreator1.html

Camera still for sale, except asking price is $1500...

This is the kit!!)

http://www.lowel.com/kits/DVcreator55.html

I have the following...Let me know if interested.


Monitor Specs:

23" Cinema High Definition Widescreen Display
power-on touch panel
USB ports on rear of monitor

Computer specs:

Dual 2GHz PowerMac G5
1Ghz front side bus per processor
1.5 GB DDR400 SDRAM (expandable to 8GB!)
512k L2 cache
(2) 250 GB Internal 7200RPM Hard Drives
Single layer 4x Super Drive. Will do DVD +/-, DVDROM, CDROM, CD-R/W
ATI Radeon 9600 (128MB memory)
Internal 10/100
56k modem
Front and Rear USB 2.0
Front and Rear firewire 400/800
Optical Audio Output
DVI to VGA adapter
Airport antenna

Push~~~~``````````````
I have 7 pcs SONY BP-GL95, selling USD400.00 for one.

Push ~~~~~~~~~~\
USD6300.00 now

Canon wide angle lens. 58mm thread mount. Mint condition and comes with lens caps for both ends, protective lens hood, and case.
$100 shipped.

Sent you an email about it..

curious, how much were the units purchased for? how old are they? how much use have they had?

thanks

david

bump!

this is a great deal.

I purchased the entire system for $1,500. new on 4-30-04. They were used for one small project. They have just a few hours of use. This system has been packed in the case. It is basically brand new.

both items for sale
asking 2000us for the pd150 -comes with 2 batteries, ac adapter, 2 microphones, etc...
and
sony walkman gv-d1000 unit asking 800us

both are in awesome working condition
thnx

did you get one yet? I'm looking too. wonder how much you got yours for and where - if you found one, that is.

Thanks,
Andrew Hsu
Morning Star Videography

I have two viewsonic CRT's for sale. They are the a90f+ and the a91f+. I got them both within a month of each other last winter. So they are new and are in great shape! They are a bit pricey to ship, but it is possible. They are in Lincoln Nebraska if pick up is an option for you. I'm looking for about 150.00 a piece. They are in the 200.00 range brand new. That's 150.00 for each one, or 300.00 for the pair.

Thanks,

Fred

I bought a 14x instead, which turned out to be much less expensive and as useful to me (think I paid $500 for mine).


EDIT:
Sorry I changed my response as I thought you were asking about the FU-1000 for some reason (I was also looking for one at some point). I worked too long on my computer I guess. Can't see clearly anymore.

The 16x can fairly easily be found on eBay for less than $1000. I've seen a bunch of them in the last few months.

800 to 900 seems to be the going rate for the 16x on Ebay. Bout the same for the 14x and 3x as well.