|
View Full Version : Changing Frame rate of a Clip Mark Monciardini February 9th, 2004, 04:12 PM Alright, I've got Final cut down pretty good, but one thing is still a mystery. Can we knock down the frame rate of a clip? I was able to do it with Premiere and Vegas, but I'm stumped on FCP. I tried the strobe filter but the feel is not the same. Jeff rescue me! Clayton Farr February 9th, 2004, 05:52 PM Hi Mark, Do you have any more detail on what you're trying to accomplish? HTH, Clayton Mark Monciardini February 9th, 2004, 06:40 PM Thanks Clayton, I just want to knock down to 24 (23.98) Matt Stahley February 10th, 2004, 12:24 PM Joes Filters has a frame rate adjuster.Not to mention a lot of other very useful filters. Robert Paul February 20th, 2004, 01:58 AM Speaking of Joes Filters, how would you rate the quality of their filters? Matt Stahley February 20th, 2004, 10:29 PM I tend to use Joes Filters on every project. IMO they are excellent. Graeme Nattress February 21st, 2004, 10:24 AM IF you want to go from 29.97 to 24p, resulting in a 24p timeline you could export to a 24p quicktime, then I have the solution for you. I wrote a pair of Standards Conversion filters for FCP - www.nattress.com - and the Film Converter is expecially designed to go from NTSC to 24p. You can see the results of it on my website where I detailed the use of this technique to produce a web short "Bird Brains: The Nest Generation" - http://www.nattress.com/BirdBrains/birdBrainsWorkflow.htm If you want to make your 60i look like 24p, but have it reside in a normal NTSC timeline, then look at my Film Effects, as that's what that was desinged for. Graeme |