Kevin Li
March 21st, 2009, 12:35 AM
My camera went in for maintanence and lost all PP. Anyone care to share what stock PP5 + PP6 is?
tnx!
tnx!
View Full Version : Lost my Picture Profile presets. Kevin Li March 21st, 2009, 12:35 AM My camera went in for maintanence and lost all PP. Anyone care to share what stock PP5 + PP6 is? tnx! Zach Love March 21st, 2009, 11:13 PM If no one else replies, I will try to get to it on Monday. (I'm away from home right now...) Gabor Heeres March 22nd, 2009, 04:02 AM Picture profiles are stored on the memorystick if inserted, right? They're gone there also? Kevin Li March 23rd, 2009, 12:20 AM I never used a memory stick. Hey Zack, if you could please link or email me the profiles, that would be most wonderful. Cheers, K Zoltan Lorincz March 23rd, 2009, 10:16 AM What model You have if it is Z7E, then here are my PP-s Zoltan Lorincz March 23rd, 2009, 10:22 AM I tried but i think the attachment is not there, giv me an e-mail and I sed you the file. Works just with Pal models Greg Laves March 23rd, 2009, 11:01 PM PP5 Black Level (4 sub settings - all zeros) Gamma (Cinematone1) Black Gamma (range middle) (Level 0) Knee (manual) {point 100%} {slope 0} Color Mode (type cinematone1) (level 8) Color Level (0) Color Phase (0) Color Depth (6 sub settings - all 0) Color Corrct (off) WB Shift (filter type LB-CC) (LB [col temp] 0) (CC [MG/GR] 0) Detail (level 0) Skintone dtl (off) Profile name (Film Look1) PP6 Black Level (4 sub settings - all zeros) Gamma (Cinematone2) Black Gamma (range middle) (Level 0) Knee (manual) {point 100%} {slope 0} Color Mode (type cinematone2) (level 8) Color Level (0) Color Phase (0) Color Depth (6 sub settings - all 0) Color Corrct (off) WB Shift (filter type LB-CC) (LB [col temp] 0) (CC [MG/GR] 0) Detail (level 0) Skintone dtl (off) Profile name (Film Look2) I hope this helps for you. Geoff Schatzel March 24th, 2009, 06:03 PM I have been using the PP5 setting almost exclusively lately. I looks so sharp. Has anyone used anything custom they would care to share and have any examples online to look at? Kevin Li March 25th, 2009, 02:42 PM Hey Greg, thanks a BUNCH!!!!! Kev. Anthony Trotter May 2nd, 2009, 03:25 AM I may have messed-up the stock PP setting for "Pro Color" by mistake. Can anyone send me those settings? Greg Laves May 4th, 2009, 03:40 PM PP3 Black Level (4 sub settings - all zeros) Gamma (ITU709) Black Gamma (range middle) (Level 0) Knee (Mode Auto) (Max Point 95%) (Sensitivity Middle) (Slope 0) Color Mode (Standard) (level 8) Color Level (0) Color Phase (0) Color Depth (6 sub settings - all 0) Color Corrct (off) WB Shift (filter type LB-CC) (LB [col temp] 0) (CC [MG/GR] 0) (R Gain 0) (B Gain 0) Detail (level 0) -Manual Set (On/Off Off) (V/H Balance 0) (B/W Balance Type 4) (Black Limit 3) (White Limit 7) (Crispening 0) (Hi-Light Detail 0) Skintone dtl (off) (Level 4) -Color Sel (Phase 43) (Range 10) (Saturation 6) (Reverse Off) (Y level 16) (Y Range 24 Profile name (Pro Color) Anthony Trotter May 5th, 2009, 04:26 AM Thank you very much. I hope to someday repay the favor. |