Anyone???I have to enter at least ten characters.

If you decide to really split it up, I would pay a good amount for the Colour EVF.

Matt

Hi Al, thank you too for being patient and understanding. Will email you soon where and when to send the books. Just hold on to it. God bless! - Jong

HI, I'm looking for a Berkey Colortran 100-091 mini pro light stand. If anyone has one for sale let me know, thanks. Or where I can buy one new.
Thanks Mark

utrocket034@yahoo.com

$1000 US or $1150 Canadian plus shipping

Greg, are you willing to sell the matte box alone if so how much?

Greg, are you willing to sell the matte box alone if so how much?
I'll only sell everything together, thanks.

email sent

Hey Rick, I just sent you an email.

The camcorder has been sold.

The "Guskers35" has been sold. Thanks!

If I wasn't about to spend what money I have on a wireless lav, I'd definitely be interested in this!

I am selling my mint condition LETUS35A. This is with the upgraded Acromat. It is non-anodized silver finish. Uses Canon FD lens mount with the 58mm thread. I am willing to throw in a 58mm to 72mm converter if you need it. There are no problems with this unit and it has been kept in its own case when not in use to keep it dust free. The case is also available for sale for an additional $15. It's a nice leather lens case that fit the letus perfectly even with the canon FD lens, comes with a shoulder strap.

Price is $300 shipped to anywhere within the US for the letus only with tracking & insurance. Please email me here for questions coolinbox-at-yahoo.dot.com (fix email). I will try to check the forum and respond to questions but since i am always doing stuff, i'd rather be emailed and i will reply ASAP. please no low-ballers... thanks again!

http://www.squaredirect.com/temp/letus35a.jpg

Still for sale, but no sony light...it's not working any longer.

Sold! Thanks Rick!

For sale is a mint Sony Wide Conversion Lens. The model number is: VCL-0752H.
The threads are 52mm, and it was used on a Sony Vx1000 for about a month before being replaced by a Century Optics fisheye lens. The lens has no scratches, glass is spotless, included is the lens cap. Here's some footage of the lens that I filmed on my Vx2000. Throw up any offer. Sorry, I dont have a digital camera. http://www.powow.com/nightmarebmx/compress.mov

How does this mount on to a camera? I'm guessing threads? And if threads, what mm thread was it designed for?

Yes, it uses 58mm threads... depending on the type of camera you have you might need to get adapter rings to make it fit your camera. I had to do the same thing to make it fit my panasonic camera.

Sent you an email.

Aanarav, did you get my e-mail?

is this the one that films rightside up????

Hey group,

Just a heads up for now. I bought a DSR-45 deck (I needed the component input for my Betacam SP work), so I'm selling my excellent condition DSR-11 deck. OK, excellent, but as most of us knows about this issue, the door is broken off (hinges are small plastic ones that lack any durability). I was quoted $70 for a new set. Other than that, I have a downloaded manual, remote control and power supply. Hours are low (operation - 2170, drum - 100, tape run - 60, threading - 110) this includes the "x10" factor. It was mainly used as a through-put deck hence the low tape hours. There is nothing wrong with it, if you are local you are welcome to come by and check it out. Buy mine or not, this is an awesome deck for any editing studio! Email me directly at siucoharley@hotmail.com for pictures. Check my user id on ebay (siucoharley) for my honest internet trading practises. (Over 230, 100% positive feedbacks in over four years of being an active ebay member) No, this deck is not currently on ebay, I'd rather sell it locally (save on all their never-ending charges) Cheers!

this is not the new FLIPPED version if thats what you're asking. I believe those sell for around $600. Please check www.letus.com for more information. thanks.

Just to help Gary's post along. I love this deck. And yes, replacing the door is a $70 dollar repair. (The TINY little hinges do get broken pretty easily. They ship you a new door, and VERY CAREFULLY, you snap it back into the hinge points... end of repair.)

Good luck Gary, and thanks for 'keeping it in the family'.

Hey group,

Just a heads up for now. I bought a DSR-45 deck (I needed the component input for my Betacam SP work), so I'm selling my excellent condition DSR-11 deck. OK, excellent, but as most of us knows about this issue, the door is broken off (hinges are small plastic ones that lack any durability). I was quoted $70 for a new set. Other than that, I have a downloaded manual, remote control and power supply. Hours are low (operation - 2170, drum - 100, tape run - 60, threading - 110) this includes the "x10" factor. It was mainly used as a through-put deck hence the low tape hours. There is nothing wrong with it, if you are local you are welcome to come by and check it out. Buy mine or not, this is an awesome deck for any editing studio! Email me directly at siucoharley@hotmail.com for pictures. Check my user id on ebay (siucoharley) for my honest internet trading practises. (Over 230, 100% positive feedbacks in over four years of being an active ebay member) No, this deck is not currently on ebay, I'd rather sell it locally (save on all their never-ending charges) Cheers!


But what's the price?

I'm interested. I sent you an email.

Oh by the way, if you have a Glidecam V20 (full package), I will be highly interested in it as well.

Please send me your price+pictures to my inbox eniolaakintoye@yahoo.com

Thanks.

Sorry, didn't intend on leaving out a price. I'm looking in the $1,200 range. At this point I'll take any "Best offers" from the member's and when my deck arrives next week, I'll email those interested.

And thanks Richard for the post. If you've used this deck you know how good it is!

Cheers.

If I wasn't about to spend what money I have on a wireless lav, I'd definitely be interested in this!
You don't need that! You need a wide angle lens! :)

I am selling my Canon GL2 finally, after several months of saving to get a DVX. This Canon GL2 has done a very good job for me and has been great. I have filled about 25-30 60min miniDV tapes, all of which have been sony premium except a few. But, I have used a head cleaner to clean the heads when using different tapes. The camera is in great mechanical condition, I can only remember two dropped frames the whole time I have had the camera. The body has a couple of minor scratches on the bottom where the tripod mounts and a couple of small scuffs on the side. The lens is in great condition and I have kept a 58mm UV filter on for protection. Also, I am inlcuding a Canon WD-58 wide angle lens .7x.

The package includes:
Canon GL2
Lens Hood
Lens Cap
Small eye peice
58mm UV haze filter
Canon PB915 battery
2xCanon PB930 battery
Original box
Manual
Canon WD-58 wide angle lens .7x with lens hood
Shoulder strap
Remote Control
Charger
Original Cables

I am looking to get about $1750 OBO for the package. If you have any questions please feel free to ask Wano540@aol.com

Thanks!
Mariano Lopez Eckerstrand

It's actually
http://www.letus35.com/

I've made a couple bids on ebay, but I'd rather buy some here if someone is looking to sell them.

is it still for sale? I will give you 325 for it, i can paypal you immediately.

Mike

Sent you an email.

Sorry - Sold for the asking price...

- Ben

thannks for the correct post.

SOLD to Todd

Just bumpin'. Thanks!

Pal, good conditions overall, ship to Italy.

Tia

Maurizio Amelotti

* THE BODY IS NOT INCLUDED JUST THE LENS/CONVERTOR/HOOD *

pics: http://www.rustyfingers.com/xl2

* Canon 16x manual lens in original box
* Century Optics .7x Wide Angle Converter w/both lens caps for 16x Manual Lens
* Century Optics Lens Hood for Converter

Will trade for a decent 3 chip camera or a Nikon D2h

Thanks
Dennis

Dennis, I sent you an email about the lens. Not sure if you're willing to sell the lens? Thanks Mark

I've got a Nebtek Lithium-Ion battery adapter for Canon batteries like this: http://www.nebtek.com/proddetail.php?prod=LIBA only mine has a longer cord that I requested.

It will power anything 12V on Canon batteries, like LCD monitors. I've also got three generic BP945's and two chargers.

Make me an offer. I take PayPal.

This sale is over

I have a Panasonic AG EZ30u. Good enough?

I'll trade you for a full GL2 package, (filters/lens attachments/batteries etc...if this is an XL2 lens that I can use on my XL H1.

* Mark offered to buy the lens but haven't heard back after I gave him a price so I'll have to wait on him before I do anything else.

Patrick: Was looking for something a little newer... sorry.

Lowell: If Mark doesn't buy the lens I'll do the trade with you. Don't know if it will work on the HD camera though. You might wat to make 100% sure before we trade, I'd hate for you to get stuck with a lens you can't use.

Thanks
Dennis

PRICE LOWERED TO $4500 shipped with insurance.

I've decided to try and sell as a package. I'll be sure to let everyone know if I decide to split it up. Thanks!


Andrew

got one, no longer looking, thanks mark

Hi Neil,
Sorry, did not get your email. Try sending it again here: premiere@asvideoproductions.com

still available.