New Price $780

Canada has an agreement with US to protect each others ‘special’ frequencies especially within (I think) 100Km from the boarder. Anything US does Canada has to adopt it and anything Canada does US has to adopt it as well. Therefore, Industry Canada has adopted the same restrictions in Canada as FCC adopted in US regarding 700MHz band.
Read this two articles:

Spectrum Management and Telecommunications - Consultation Paper on Low-power Licensed Radiocommunication Devices, Including Wireless Microphones, in the Band 698-806*MHz (http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf09596.html)
Spectrum Management and Telecommunications - SAB-001-10: Low-power Licensed Radiocommunication Devices, Including Wireless Microphones, in the Band 698-806 MHz (http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf09777.html)

Selling my Marshall on location LCD,Havnt used it too much,bought it for Sony ex1,also battery plate is for EX1 type.Unit work as it must,and looks like new.Power adapter included.only addition i have made to battery plate,fitted little power in (like steadicam pilot have)
ask for pic's.

Asking 525 £ plus shipping.

Regards

Raul Rooma

With all the good advice from some to keep these items I decided to sell regardless. I will entertain your offers but as I know most of you here are on a tight budget I may or may not get the price range I'd expect. The rig is estimated between 8-10K for both vest and Sled. Now this is allot for many on this board but like I said, I will entertain your offers and if I see something I like, than fine. I'll let it go for that price. But what you get are components that you will find on top stabilizer brands. N.B. The sled comes with only one AB Trimpac 14.4v battery. I have two more that I borrowed as well as a charger. But guy is willing to sell it. So if you're interested than he will give me a good deal. As you know chargers cost a lot and this one have place to charge 4 AB batteries.

Custom sled:

* 1.5" outer Carbon Fiber post

* Aluminum inner post (not painted)

* Steadicam Archer I top stage with a modified 3-pol 24v contact addition ( bought from Steadicam operator Rick Lewis. Rick had the 24v installed)

* Lower junction box contacts have:

1. 2 Hirose 'video out'

2. 2 BNC 'video out'

3. 2 (2-pol) LEMO 12v 'power out'

4. 12/24v (3-pol) LEMO 'power out'

5. HD-SDI contact (not wired internally)

6. 1 12v 'power in' (MK-V wired)

7. 1 12/24v 'power in' (MK-V wired)

8. ON/OFF switch for entire system

9. 12 to 24v switch

* 1 12/24v dual AB Battery Mount (from MK-v)

* 1 AB GOLD battery mount

* Steadicam EFP Gimbal ( bought from Steadicam operator, Steve Fracol. It was serviced before I bought it)

* MK-v EFP replacement knurled gimbal grip

* A 4-point VD (video distributor). So all video outputs on the bottom connectors are wired. There is one contact left over for another.

* The lower lower battery mount can be adjusted for fore & Aft, by loosening the Manfrotto 357 slider. I had another slider which made it easier for micro adjustment but it did not deem too be very solid. So I exchanged
it for the 357, which is more solid. Any number of batteries can be used. 1-3. I installed a Schottky diode within each battery mount for extra safety. This prevents power from flowing back into itself. There are two Automatic 5A fuses installed. (you can replace these 5A with 10A instead. My Tech guy felt the 10A wasn't needed at the time, since I was not flying anything that power consuming. I had planned on changing it but never got around to doing it) . The fuses are marked with the number 7 & 8. When this trips all you have to do is push the button to reset the system.

The internal wiring of the system, which is pretty much the same as the standard systems available today. You get a rough schematic of the internal wiring of the system, which is pretty much the same as the standard systems available today. But just to be sure I did a schematic so you know how the wiring is done.

The monitor is an 9" SD monitor. Nothing fancy except you can rotate the pic. This works perfectly if you decide to go into low mode and do not want to rotate the entire monitor. The monitor has a 450nit. I know it is not that much but you can replace it or you can just decide to get the sled without the monitor. But you will have to make your own monitor mount. The rods are Cf but only strong very light monitors. I would suggest aluminum rods instead.

.........................

* A heavily modified EFP Steadicam vest. I had new parts machined with thicker material at the chest plate and spar, since the original spars were broken when I purchased the vest from Steadicam operator Elite, Steve
Fracol. I also machine a new female standard socket block. I modified the vest to have ratchets instead of the velcro.

-------------------

http://i55.photobucket.com/albums/g136/tiking/Aeronamic%20Systems/photo4.jpg

http://i55.photobucket.com/albums/g136/tiking/Aeronamic%20Systems/photo2.jpg

http://i55.photobucket.com/albums/g136/tiking/Aeronamic%20Systems/rig_2.jpg

http://i55.photobucket.com/albums/g136/tiking/Aeronamic%20Systems/photo5.jpg

http://i55.photobucket.com/albums/g136/tiking/Aeronamic%20Systems/photo6.jpg

http://i55.photobucket.com/albums/g136/tiking/Aeronamic%20Systems/photo7.jpg

John I sent the message below to the email listed on your website and it came back as a failed delivery:


John, this is Tim in Dallas, I've tried calling and texting you about the Xl H1 housing, but I keep getting a message that says your mailbox is full...I've got a gig coming up that'll require some water work and I'd really like to ask you about the housing (I've never had a water shoot)...I'm definitely interested in buying, but just need some clarification on a couple of issues before I pull the trigger...if you still have the housing, please give me a call when you get a minute (972.746.1665)...I think you tried calling me back initially but I was on the other line with my Dad trying to explain how to use Netflix (I felt like sticking my head in the toilet after 15 mins of breaking down how the instant feature worked...Dad<technology) and failed to recognize your area code (sorry 'bout that)...anyway, I'm usually available (seriously), so I hope to hear from you

later man
tim

Hey FEEDBACK!!!!...alright, thanks Kin, 136 views later I finally get a little direction...if ANYONE out there is interested in this camera, its literally just living in my closet and is eager to see the light of day, so just make me an offer and we'll take it from there...although, while I agree with Kin's assessment, I'd prefer to keep this a full package deal.

ugh that sucks, guess I cant use this then.

email me at info@zsionmedia.com and I'll email you pictures.

Porta Brace CTC-2 bag - excellent condition.

See the Porta Brace link at: PortaBrace - Product Detail:CTC-2 (http://www.portabrace.com/productA-CTC-2)

Sized for XL-1, XL-1S and similar sized cameras, plus accessories.

Asking $125.00, includes shipping

Pay Pal OK.

thank you for all interest and clarification guys. Man i just need to get rid of these didnt know it was this hard to sell LOL.

For sale is a Century Optics 0.7x lens for the Sony Z1 or FX1.
Glass is perfect as it was only used for a month.

Asking $400cnd OBO

will ship anywhere, although buy pays for shipping.

neilafisher@gmail.com

http://bigfishfreeride.com/photo_files/IMG_5947.JPG

http://bigfishfreeride.com/photo_files/IMG_5938.JPG

http://bigfishfreeride.com/photo_files/IMG_5943.JPG

http://bigfishfreeride.com/photo_files/IMG_5944.JPG

Looking for a Zoom H4N complete package with SD card. If you have one at a decent price, please let me know.

Thanks.

For sale:

Sony PMW-EX3, 8GB SXS card, 16GB MXF card with reader cable, original Sony SXS reader, batteries BP-U30 and BP-U60 with charger, Petrol bag. Price: 6.235 Euro.
Profesionální HD kamera Sony PMW-EX3 (1152492246) - Aukro - Aukce OnLine (http://aukro.cz/item1152492246_profesionalni_hd_kamera_sony_pmw_ex3.html)

Vinten Pro5 tripod with bag. Price: 470 Euro.
Stativ Vinten PRO5 pro kamery do 7kg, bra?na (1152492235) - Aukro - Aukce OnLine (http://aukro.cz/item1152492235_stativ_vinten_pro5_pro_kamery_do_7kg_brasna.html)

Letus Extreme with EX1/3 achromat lens, threads for EX1/3 (77mm) and JVC HD cameras (82mm), lens mounts for Canon and Nikon. Price: 588 Euro.
35mm DOF adaptér Letus35 EXTREME (1152492220) - Aukro - Aukce OnLine (http://aukro.cz/item1152492220_35mm_dof_adapter_letus35_extreme.html)

SWIT S-2020 camera light with battery. Prize: 59 Euro.
kamerové sv?tlo SWIT S-2020 s baterií (1152492226) - Aukro - Aukce OnLine (http://aukro.cz/item1152492226_kamerove_svetlo_swit_s_2020_s_baterii.html)

Contact: Radek Volf - email: profikamera@seznam.cz

Hi everyone:

I'd really like to get rid of these items. Please consider the following REDUCED prices:

1) Wacom Tablet - $185, including shipping & PayPal

2) Manfrotto 322RC2 - $50, including shipping & PayPal

3) Manfrotto 486RC2 - $30, including shipping & PayPal

~ Charles

Looking to purchase the glidecam x-10 system. The vest and arm. Also looking to get the HD-4000 and the base monitor as well.

microphones still available, willing to do a package deal.

also will split international shipping

ok, price dropped $300cnd

Heath

Check you mail... I have one available.

$780 for each card and $575 for the litepanels

Do you still have this charger available for sale. If so I'm interested

The Samson wireless kits are SOLD

Thank you for the reply. I just got one before you posted this. Sucks, yours was a better deal. :(

This has been used a few times indoors for scratch track recording. Bought new a year ago, I've since upgraded to a different setup so this needs to find a new home. Screen has had a protective cover on it since day one so no scratches. Complete with windscreen, protective case, 1GB SD card, mic stand adapter, manuals. Cannot find the original Cubase LE 4 disc so I have included updated version from Steinberg website on CD.

$240 Shipped CONUS, add $5 for AK and HI.

nikkor 105mm
Sold thx!

FS: NIKON 55mm F3.5 MICRO NIKKOR with M2 nikon adapter... Excellent conditions $90.00 shipped paypal 48 states

I am selling an extra Sony PDW-U1 Optical drive that is still in the box with warranty. This is an extra I have had sitting around and would like to move. New $2895 I will sell for $2295. You pay insured shipping and at $2295 I will pay paypal.

The following Item has been sold.

3) Manfrotto 486RC2 - $30, including shipping & PayPal
Manfrotto 496RC2 Compact Ball Head with 200PL-14 QR 496RC2 - B&H

I'll lower the price to $500 even!

What size are the P2 cards, you left that out?

Dan

Yikes sorry, they are 64 GB E Cards. These prices are also with paypal fees included so by check or money order they would be about 2.5% cheaper.

Thanks!

bump 65.00 shipped 48 states paypal

Messaged! :)

SIGMA 70-200mm f/2.8 II EX DG APO Macro HSM AF Lens for Canon EOS

* Front & Rear Caps

* Lens Hood

* Soft Case with Strap

* TS-21 Tripod Collar

Used for only 2 events. Looking to upgrade.

$715 + shipping

Is this the same lens or does your have something else?


Sigma 70-200mm f/2.8 II EX DG APO Macro HSM AF Lens 579-101 -

Interesting.. I had no idea that B&H sold cinevate stuff. I'm unsure if this rig is the heavy support configuration, as it does not state this, but the picture is correct. If so I can lower my asking price to $700. Shame though... I spent bout $200 more just a couple months ago!

The rig is practically brand new, and hasn't been used on a shoot. Just messing around in backyard.

Did you ever sell this camera?

I still have it Ben.

Enybody...??offers a welcome..;)Option is i can send it to London,and local pickup can be managed!

Regards

Raul

All items are sold. Thanks for the purchases!

~ Charles

The Zoom H4n is SOLD!

Thank you.

Yes that's the one, Charlie

Clearing out a lot of stuff, here's Some random items I'm grouping together for sale....

All prices include shipping in the ConUS...pics below all the listings.

$200 Sony broadcast field monitor model 8045Q

The pinnacle of Sony's CRT field monitors, and the standard of broadcasters. 4X3 or 16x9 switchable High Resolution (450 TV lines) standard definition field monitor with blue only, underscan, tally, and all the other professional broadcast features you'd expect. Designed to assure very stable and accurate color rendition. Perfect to color correct your FCP editing projects, or for accurate monitoring on location. Originally over $800.

Minty cosmetic and functional condition. This has been gently used, always indoors, mostly in studio conditions. Never rented out.

Rear panel connections: Y/C (s-video) in and out, component RGB in (SMPTE or Beta level), 2 selectable composite video in and out (loop-through), each with mono audio in and out. External sync in/out.

Versatile power options include AC in, DC 12V in (4-pin XLR), and battery power via dual NP-1 slots (batteries not included.) Power cord IS included, though not pictured.

$30 Velbon Video Monopod Model UP-4DX.
Fluid tilt head with locking quick-release. Rubber foot screws in to convert to spike foot. 4 sections with side lever locks. Perfect for small camcorders and video DSLR's. Great for documentary/wildlife photography/videography. I've even used it with my HVX200. Logo paint is partially rubbed off and other minor signs of wear but tubes are in perfect condition with no dings or dents and leg locks work great. Photo shows dried gunk from gaffer tape but I will remove that before shippping.Good for use as a still camera support, too. The newer model (UP-400DX) looks identical except for paint color, and sells for $49 with shipping.

$35 Manfrotto universal ground spreader for non-spiked tripods
Model 3155 (like the current model 165 but with black knobs instead of silver). For non-spiked tripods (or retractable spikes), has rubber tiedowns for each leg. Radius adjusts from 15-24 inches (for 32-52” footprint). Like new except for some very minor scuffing while in storage, never used. B&H new $56 incl shipping

$75 Blue dyed canvas photo backdrop-10ft w x 12ft long
Never used. A nice, heavy, hand-dyed muslin canvas portrait backdrop. Features a medium-dark blue color overall, with deliberate lighter and darker regions and a very subtle occasional “splatter”. Crumpled for that distinctive look. Sewn-in rod pocket. I think it is Westcott brand but can't find the invoice. Similar sells for $114 at B&H

I went on a deer scouting mission recently and had a chance to see the xha1 in action. A short talk with my wife and she was OK with me getting one for the upcoming season. So, that leads me to somewhat of a problem - I need to get rid of my xl1s first. It has been in one person's care it's entire life. I can assure you it has been in top care. For the most part, it has only been used over the last 6 years in October/November for the hunting months (mostly on weekends only).

With the few hours on the heads and all the accessories I would like to get $1300.00 out of it (to your door). If I am way off on the price, would you please let me know. I've seen cameras only going for over $1000.00 and I'm including extras (a very nice camera bag, windscreen, camkote, etc). Everything goes together.

Here is what is contained in the package:

Canon xl1s camera
Portabrace camera bag
Battery charger
2 batteries
windscreen
alternate shoulder mount
xlr input shoulder mount (for wireless mics)
Camkote rain jacket/cover

In the picture, you see a camera light for filming after dark...it is NOT INCLUDED (I originally included it, but realized it works on the new xha1 I'm getting).

Thanks!

http://i323.photobucket.com/albums/nn451/thede18/IMG_5589copy.jpg

http://i323.photobucket.com/albums/nn451/thede18/IMG_5582copy.jpg

http://i323.photobucket.com/albums/nn451/thede18/IMG_5583copy.jpg

http://i323.photobucket.com/albums/nn451/thede18/IMG_5584copy.jpg

http://i323.photobucket.com/albums/nn451/thede18/IMG_5585copy.jpg

http://i323.photobucket.com/albums/nn451/thede18/IMG_5588copy.jpg

Thanks Joe,

Thanks for shipping it to me so fast!! Works great and is in great condition!

Thanks again!

David

What would you ask in euro's?
regards
Luc

This Mini-DV camcorder is 8 months old, only used about five hours. Just bought an NX5U and would like to sell the FX1000. Comes with all original accessories and manual.

USD$ 2,500 OBO

Like new. Reason for selling, moving to HD. $575 OBO.

Dennis

Hi!thnx for your interest..think 640eur will be ok!

Regards

Raul

payment sent!

Any cosmetic damage?

Ben