This is a big belt that will power an XL1 for several days. Great for event and wedding videographers. It has multiple outlets so more than one accessory (or camera) can be powered at a time. The cells were replaced less than a year ago and the belt is like new. Comes with belt, battery and AC charger. I've used NRG belts for a number of years and have never been disappointed.. They are well made and rugged enough to last a lifetime. B&H Photo sells this belt new for $450. This belt is like new and I'm asking $175 plus shipping. I accept PayPal, Money Orders and Bank Checks.

XLR connectors?
Photo of the item?

Jeff,
This one has my name on it if I can get my partner to agree....
I'll get back to you ASAP.
Rgds.,
Dan

One XLR and one cigarette connection (maximum versatility). Looks just like the one on the NRG site. (http://www.nrgresearch.com/) PowerMax Pro 12v, model 97014-a.

Selling my PD100 kit

includes:

Memory stick
Quantaray hard case with foam
charger the stock battery and extra np-730
w/a sony lens sony vcl .7
Tiffen uv filter
remote commander
3 new dvcam tapes

camera is used has one flaw the vtr buttons on top stick so I use the remote

Price 1150 obo

M

Would you be willing to sell the 16x separate? If so, how much?

I have a 14x XL1 manual lenses for sale. I bought two figuring I'd use them exclusively over my stock lenses, but have barely used either of them at all. Supermint quality.

Anyway, I need a new tripod among other things, like more lights, a better mic, digital SLR, laptop, you know how it is, always the toys...
So you can get yourself a like new Canon 14x lens for $800. My personal money back garuantee if there is anything wrong with it. Paypal accepted and preferred. Buyer pays shipping.

VERY OPEN TO TRADES, especially for tripods or the other things I've mentionned above.

Still for sale and a new Lower Price, $875

New, Lower Price, $1,750 plus shipping.

Could I use it with my GL2 or would it be overkill?

Sorry to hear about your sholder. I ruined my back lifting a patient on a call so now holding a camera for long is a uh, pain.

Am intersted in the V8.

It offers long term comfort. The weight is distributed off your arm to your hips, etc. The weight is not a strain on the shoulder, but I don't have 100% range of motion. I would not term it overkill. It will allow for much longer shots and a greater range of motion control over the smaller units. It also provides an upgrade path should you replace the GL2 with a larger camera. Your also learning a professional skill set.

Sold. Thank You.

All has been sold, thanks.

one note since i was asked why i was selling its a great camera but since i already have two others xl1/vx2000 and would like to pay some bills getting rid of this...

Just thought I'd drop a vote of confidence for Michel; he sold me his other vx2000 2 weeks ago and he was great to deal with... buy with confidence.

Last chance before it goes to ebay, $1700 plus shipping.

Last chance before it goes to ebay, $1,700.

Last chance before it goes to ebay, $825.

I'll give a blind endorsement here; anyone thinking about buying a handheld-type stabilizer for their XL1 or similar weighted camera, this is a MUCH better way to go. And if you were already sold on the V-8 and wanted to buy used, you'd be way ahead of the game buying from Jeff than from a random eBay seller.

Jeff, that's a bummer about your shoulder. Hope it heals well, and soon.

(p.s. my Installer issue continues to baffle--have already done an hour on the phone with a freelance Mac troubleshooter to no avail...!)

It's too bad I already have my V16. I could have saved myself a big chunk of change!

Argh, stop tempting me to go out and get another loan. It's not fair (and I need a tripod).

Wish I could afford it right now.

Hey, the wife says I can buy this :-) How can I get in touch with you directly?
Thanks,
Sam

Sam, did you get my email this morning?

Jeff

Just emailed ya back,
Thanks!

just a quick note keeping this up until 7/29 then will post on ebay..btw the pd100 is the "up" model of the trv900....

It's sold. Thanks.

I am intrested in your kit. Can you email me at cuts209@pacbell.net ?

Thanks,
Mike Filson

Check your email.

3D Studio Max R3 for sale. Original software. Includes original manuals, security key, installation codes, original software disk.

This is high end computer animation software. This would be great for someone who want to "get into" computer animation. The original license is "not" transferable.

This retails for over $4000.00.

I'm selling for $2000.00 or best offer.

Call or e-mail with questions. 408-202-2214

David

I'm confused here.

If the license is not transferrable, then you cannot legally sell it and the buyer is getting something that is useless (and illegal) right?

Discreet has just announced 3D studio Max 6 so this is $2,000 of obsolete software to which you cannot legally sell the license.

David, If you cannot legally transfer the license then I don't believe this forum is a good place to attempt the sale.

$2k seems high for R3, which is not very useful software at this point.

So basically we are paying for software that cannot be upgraded and supported for the full price at some software resellers for the original version that will include support and upgrades and access to downloadable materials.

Hi Jeff,
I hope this is still available, as I just emailed you (at your registered address here) with some questions. Thanks!

Robbie

Sorry, sold.

I thought I had it priced to sell.......

How much do these lenses go for used (20hrs)?

What would be a fair deal?

How about $795.00?

Going....going.....

Gone?

Hard item to sell, since most everyone that owns an XL1(s) has one already.
I watched the Ebay market for these once when I needed an extra one (I bought a 14x manual instead), and the Ebay prices were, ummm.... considerably lower. Like in the $300-$500 range.

Every once in awhile you'll find the owner of an older XL1 who wants to upgrade to this lens. Hang in there. $600 or a bit lower would probably be more appropriate.

Thanks for the advice...

I don't need to get rid of it and perhaps I will just buy a body for it and or keep it as a back up. I'm really enjoying my new 16Xmanual, however, and don't think I'll be too excited to use anything else.

Thanks again.....Chris and Dylan.

Mike

This is a new Lee bellows matte box and new Tiffen filter. Both come in there own cases...lens mount, no rods required. Just after getting it I added the Mini35 system which required moving to a Lee photo matte box system to fit my different primes. All the system needs is a Lee adapter ring to fit any Canon XL1 lens. This package is about $465 street price. I'd take $225.

Hey,
You've got mail! (at your registered DVinfo Net email address). Thanks!

Robbie

Robbie, I haven't gotten any new e-mail from you. I'll send you one just in case.

I have a manual 14x lense in immaculate condition, I would be willing to sell it at a fair price. drop me an email:
stephen_birdsong@yahoo.com

Stephen

Hey Guys, I just bought the FCP 4 educational version and I want to sell it. Info: It is still shrink-wrapped and in box fresh from Apple. I will sell it as much as I bought it. Not trying to make money or anything just need the money back. I bought it from the school's library and I can not return it (fine print says I can not) Anyone interested? Please let me know. I need to sell it A.S.A.P. I need the money badly. Thanks.

Hi Jim, which model exactly are you selling?

For those that are looking for a matte box, this sounds like a great deal.

Let us know Jim,

- don

hey i was just wondering if anyone is possibly selling or knows about a cheap new or used g4 powerbook and vx2000 that is for sale. thanks

Hey, you've got mail for the VX2000! If you haven't recieved an email at the account you've registered with these forums (I've been having some problems with my email) just drop me a line at robsmo@yahoo.com so I can just reply. Thanks!

Robbie

This camera was purchased for a hobby which I have no time for. It has probably been used for a total of 80 minutes. I'm sure there are a couple of items I've forgotten to list below.

XL-1S package includes:
• Zoom Lens 16x XL 5.5-88mm
•_ CA-910 Charger/Power Adapter
•_ BP-930 Battery Pack
•_ FU-500 Color Viewfinder
•_ DC-900 DC Coupler
•_ WL-D3000 Remote
•_ S-Video Cable
•_ STV-150 Stereo Video Cable
•_ SS-1000 Shoulder Strap
•_ Lens Cap
•_ Lens Hood
•_ Stereo Microphone
•_ SP-100 Shoulder Pad


EXTRAS:

Canon 3X Super Wide-Angle Zoom Lens

VL-10Li Battery Video Light

DAVIS & SANFORD tripod w/case
ProVista, combined with the FM18 Fluid
Video Head,

Extra Battery
BP-945 Lithium Battery Pack

H-910 Dual Battery Charger/Holder

KATA CCC-3333 case

$4000.00 for entire package. offers accepted.

If anyone in the NY area is interested I can meet you in the city. I work in Mid-Town.
Serious inquiries please email me at:

rpekich@optonline.net

-randy

Hey Don...It's the Lee Filters VH85. I probably should have hyped the specifics a little. This is 2 stage, 4mm, one rotating, filter assembly and a fullly collapsable bellows style matte box. It's a quality set up, brand new in a curdora case. Same goes for the Tiffen grad .06. For a single filter it's one of the most practicle, also new and in a curdora case.

It's sitting in the studio closet. It just needs a $39 adapter ring to fit any Canon lens (the system is universal and uses specific rings for different camera setups).

I'll make it $200 for someone looking to move into a pro matte box/filter setup. I know a lot of people start threads about them from time to time, so I'll leave it here until someone finds it and says "oh...that's a killer deal" It really is. Lee took care of me when I realized I needed a different system for the primes. I like to pass along the good deals.

Yeeesh Jim! That is a SUPER SWEET DEAL!

That is the same LEE matte box setup that I did an article on back in 2001
http://noisybrain.com/onloc1_01.html
http://noisybrain.com/onloc1_02.html

This is an excellent value setup for someone who wants a very versatile and *compact* matte box system.

I would definitely buy your LEE VH85, but as you know, I already have one ;-).

Looking very forward to meeting you soon Jim!

- don