aloha

I am wondering if the nodal point on my EX-1 changes with the position of the zoom lens or is it measured from the sensor, which i assumed stayed stationary. i could have misread something yesterday which has lead to my confusion. i thought that the nodal point for the lens at its widest point would be in one discernable place and the nodal point would change to another discernable point when fully zoomed in. any other lens position would be between those two points. yesterday i read the nodal point in digital photograph was the point where the image struck the sensor.

i am hoping someone can comment and also let me know about where the nodal point is on the EX1.

happy holidays
tito

i am not sur that so important since it is probably not noticeable.
but logic would be that nodal point is moving inside the zoom lens.
you can do a simple test by aligning two objects (one far, one close) and rotating the cam.
the objects should stay aligned , whatever they are in the field of view (center or border).
repeat with different zoom.

Thank you
so is the sensor in the zoom lens?
or does the position of the sensor have no effect on the nodal point in a digital camera?
tito

Thank you
so is the sensor in the zoom lens?
or does the position of the sensor have no effect on the nodal point in a digital camera?
tito

The sensors are in the camera body proper. Are you interested in the nodal point for VR/panoramic photography? If so, then what you should be looking for is known as the "entrance pupil". There are a couple of terse articles on the subject on Wikipedia:

http://en.wikipedia.org/wiki/Cardinal_point_(optics)
Entrance pupil - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Entrance_pupil)

HTH

thank you Brooks
i started looking at nodal points for CG effects using models and real objects.
all this is of interest.
tito