Sorry to bother the whole list with this one, but I've e-mailed Sennheiser UK several times and received no reply. Their website's dealer locator was at first unable to locate the nearest dealer for my postcode (??) but eventually give me a list of closed music shops, headphone only outlets and audio installation contractors. Many of these addresses look out of date to me anyway.

Only being able to source spares for Sennheiser headphones through Google I need your help.

Specifically I'm trying to find spare clips for the Freeport ME2 clip on mics which we use in the church. One visiting preacher appears to have removed the microphone but left the clip on his jacket! If I can't find the clips I'll need to order the ME2 mic compete with clip.

Any suggestions of who would be able to supply this?

Colin, try

Welcome to the Southern Sound Kit Company-the Souths premier audio hire facility. (http://www.southernsoundkitcompany.co.uk/)

It's run by Barry Smith, a very helpful guy.

Colin, try

Welcome to the Southern Sound Kit Company-the Souths premier audio hire facility. (http://www.southernsoundkitcompany.co.uk/)

It's run by Barry Smith, a very helpful guy.

Thanks Nick, I've dropped him an email.

Hi colin - Here is the email address for John Willett, the technical chap at Sennheiser UK. It's been a while since I spoke to him but I am sure he is still there, he was always helpful in steering us in the right direction for getting Senn Accessories.

JWillett@sennheiser.co.uk

Regards: Stu
www.studioscotland.com

Sennheiser ones are expensive so have a look at these:Pearstone | Tie Clip for Pearstone OLM2, Sennheiser | TC-OLM2-5 (http://www.bhphotovideo.com/c/product/549040-REG/Pearstone_TC_OLM2_5_Tie_Clip_for_Pearstone.html)
I ordered 10 clips and wind gags so I have a good stock:
Pearstone | WSM-0LM2-5 Metal Windscreen for OLM2 | WSM-0LM2-5 (http://www.bhphotovideo.com/c/product/549034-REG/Pearstone_WSM_0LM2_5_WSM_0LM2_5_Metal_Windscreen_for.html)

Hi colin - Here is the email address for John Willett, the technical chap at Sennheiser UK. It's been a while since I spoke to him but I am sure he is still there, he was always helpful in steering us in the right direction for getting Senn Accessories.

JWillett@sennheiser.co.uk

Regards: Stu
www.studioscotland.com

Thanks for that useful address, Stewart. I'll contact John as he's best placed to advise me. I assume he'll be working Mon - Fri though, and I might not hear from him for a few days.

Sennheiser ones are expensive so have a look at these:Pearstone | Tie Clip for Pearstone OLM2, Sennheiser | TC-OLM2-5 (http://www.bhphotovideo.com/c/product/549040-REG/Pearstone_TC_OLM2_5_Tie_Clip_for_Pearstone.html)
I ordered 10 clips and wind gags so I have a good stock:
Pearstone | WSM-0LM2-5 Metal Windscreen for OLM2 | WSM-0LM2-5 (http://www.bhphotovideo.com/c/product/549034-REG/Pearstone_WSM_0LM2_5_WSM_0LM2_5_Metal_Windscreen_for.html)

Thanks for that link Gary. Ouch! - $26.95 for the cheap alternative? What do the Senny ones cost then? I think I paid £100 each for the entire Freeport systems for the church - mic/clip, bodypack TX and diversity receiver (though XLRs cables were extra). They're OK for PA but I wouldn't use them for recording.

Thanks for that link Gary. Ouch! - $26.95 for the cheap alternative? What do the Senny ones cost then? I think I paid £100 each for the entire Freeport systems for the church - mic/clip, bodypack TX and diversity receiver (though XLRs cables were extra). They're OK for PA but I wouldn't use them for recording.

Sennheiser ones are $7 each in the states, dont know what they are here.

Thanks for that useful address, Stewart. I'll contact John as he's best placed to advise me. I assume he'll be working Mon - Fri though, and I might not hear from him for a few days.

Message received - but I only saw it today as I have been out of the country for a couple of weeks (International Recording Contest time).

I passed the query on to Nina Catlin in spare parts who will sort it for you.

Message received - but I only saw it today as I have been out of the country for a couple of weeks (International Recording Contest time).

I passed the query on to Nina Catlin in spare parts who will sort it for you.

Thanks for the reply, John and also for Nina's list of mail order dealers- that's made it clearer how to get spares for the Freeport. I had already made contact with another dealer recommended by Nick Flowers, so now I'm well provided for.

For info Colin could you let us know how much the clips are here in the UK and who is best to source them from.

For info Colin could you let us know how much the clips are here in the UK and who is best to source them from.

Certainly Gary. First to reply above was Nick Flowers:
Originally Posted by Nick Flowers
Colin, try
Welcome to the Southern Sound Kit Company-the Souths premier audio hire facility. (http://www.southernsoundkitcompany.co.uk/)

It's run by Barry Smith, a very helpful guy.

Barry emailed me:

I can do the Clips for £ 7.00 each plus Postage

Barry B. Smith
Southern sound Kit Company
Part of the Overhead sound Ltd. Group

Barry@southernsoundkitcompany.co.uk

02380 260004
07860 383035


These were the FreePort M2 mic clips - I will need to look to see if they will fit the mic supplied with the G2 ENG camera system.

So 5x7 =£35 so those $26 pearstone ones are still better value at £17.

So 5x7 =£35 so those $26 pearstone ones are still better value at £17.

Ah - yes, you are correct Gary and I had not noticed that it was a pack of 5 that Pearston were selling. What was the postage on the order from B & H in the US?

The postage wasnt cheap as its fixed cost but if you can get a few items together for an order it will be worth ordering a few as spares. They are exactly the same as the sennheiser ones and well made.

The postage wasnt cheap as its fixed cost but if you can get a few items together for an order it will be worth ordering a few as spares. They are exactly the same as the sennheiser ones and well made.

So if we could find these for sale in the UK that would be the best solution?

So if we could find these for sale in the UK that would be the best solution?

Now me being crap at business things such as buying shed loads and offering a service selling them on as spares to all those G2 users in the UK.

Is there enough demand? the pearstone ones are good value and are not available here.