I am prepping for a three camera live switched & live streamed shoot (unfortunately is is a mostly pro-bono job for a club I used to be a member of..... but it will pay for the additional gear I need,....... yeah yeah... I know.... bad habit to still be in). The deal is I would get all DVD sales ($10 each expected a max of about $620 in sales - 28 quartets 16 choruses).

Should be quite hectic. It is a regional choir competition (competitors all the way from Alaska, Western Canada and the Northwestern US). The event chairperson has the following requirements (some more wishes than requirements).

1) Each quartet gets a DVD of their performance by the end of the competition.
2) Each choir gets a DVD of their performance by the end of the competition.
3) The Directors in the Chorus competition get a "director PiP" cut that has a camera facing them so the director can see how the chorus responded. This may or may not need to be done by the end of the competition (in other words a post-production edit may be ok).
4) The Quartet, Chorus, and show of champions is broadcast live via webcast (I'm not doing that part, they already have someone volunteering for that).
5) The district Org gets an archival copy of the entire competition for training future judges.

The real fun (and complications) comes as a result of requirement #3 and the organizer wanting to have switched cameras for #1/2 and not just a single static camera (static split screen would be ok, but I don't know how to do that with out it being a transition held 1/2 way on a real switcher).

The entire production wouldn't be too bad if there were two cameras (one dedicated to webcast and one for burning), or even just one camera total and an s-video splitter to send the signal to both. The org chair is trying to raise the production value from previous district competitions (held in Alaska, Surey, etc) a bit to get greater participation and make a good impression for our state's chapter.

So essentially I need a switcher, a few 100' s-video cables, a bunch of monitors, and live DVD-burners.

I am currently planning on picking up (somehow) either a Videonics MX-1 or MX-3000 on ebay (currently the only place I can find them). The Videonics units require one TV to preview & view the working surface (which cam is up next, what transition is active, etc) and then one to view the final output (after running it through the DVD recorder).

My questions (at last) to the DVInfo community are....

1) How long can an s-video run be before it needs a signal booster? NewEgg has a 100' cable, but there is no way the stage is any shorter than 150' from the back of the auditorium where it is likely that our cams & switcher will be.

2) Any personal experience with the videonics units? Alternate multi-input synched switchers?

3) Any experience with live DVD burning devices. I'm looking at the TOSHIBA D-R410 (http://www.newegg.com/Product/Product.aspx?Item=N82E16882116124) That seems to be the cheapest DVD burner. IT has the bonus of also being an upconverter and it can (theoretically) burn at longer play times (up to 6 hrs if it scales down to 320x240 from 720x480, but I wouldn't trust the compatibility on that setting)

4) Anyone with experience doing this care to comment on my plans? I have some, especially given the recent long thread about live events as they relate to live wedding reception broadcast. Fortunately there is NO post involved in this shoot (unless I need to for the Director's PiP).

See the attached schematic for a potential layout (if there is the ability to have the director's cam signal get back to the AV table that is).

Bump..... Anyone have information on cable run length restrictions? Or personal experience with the live Toshiba DVD-Burner?

Sounds like fun. Just some ideas from my experience-

-I've run 200-300' of S-Video no problem for a variety of events.

- Check out the Sony MC5 Sony | DVDirect MC5 Multi-Function DVD Recorder | VRDMC5 | B&H (http://www.bhphotovideo.com/c/product/505213-REG/Sony_VRDMC5_DVDirect_MC5_Multi_Function_DVD.html) It has a built in confidence monitor. Pretty sure you can find it closer to $100 if you look around.

- I've also used Tricaster switchers. Pretty neat. They take 3 inputs and put everything on one screen for you. They also stream live outputs. NewTek | Tricaster Live Production Studio | TC000000-0101 | B&H (http://www.bhphotovideo.com/bnh/controller/home?O=&m=Y&IC=NETC&A=RetrieveSku&Q=)

Good luck, sound like its going to be quite a time.

I agree a Tricaster would be perfect but start around $5k. Output can stream and to DVR.
Also see Wirecast (Apple - Downloads - Video - Wirecast (http://www.apple.com/downloads/macosx/video/wirecast.html)) sort of a pc version of a tricaster.

Fortunately for me, all web streaming will be taken care of by another individual, so I do not need to arrange for it. Unfortunately for me, I'm not going to get paid any more than the possible max DVD sales income, of $620.

So in order for me to even be able to do the job, I need to keep my equipment purchases below that figure. Preferably, much further below.

That is good news on the svideo cables then. Now all I need to do is figure out of the event staff will run the cable, or if I need to.

- Check out the Sony MC5 Sony | DVDirect MC5 Multi-Function DVD Recorder | VRDMC5 | B&H (http://www.bhphotovideo.com/c/product/505213-REG/Sony_VRDMC5_DVDirect_MC5_Multi_Function_DVD.html) It has a built in confidence monitor. Pretty sure you can find it closer to $100 if you look around.

The MC5 doesnt' have any AV out, so I'd need to split output before it (if I wanted to string multiple DVD recorders or if I needed to send the output to a different box). Also, it does not have the ability to record at greatly reduced quality (to increase play time). IE, record at reduced bitdepth. This is only useful for my legal videography clients.

Hi Jason,

In theory you need to boost signal after 50 ft but that does not mean you can't go beyond 50 ft, i've seen 100 ft runs without problems.

Question for you, are the DVD orders guaranteed? I shot a local beauty pageant with the same set-up, contestant will buy DVDs, I am selling DVDs at $ 50 each, I am shooting 12 Contestants so basically I am making $ 600. In the end though, only the winner wanted a copy of the DVD. So unless it's guaranteed, I would walk away from it.

In theory you need to boost signal after 50 ft but that does not mean you can't go beyond 50 ft, i've seen 100 ft runs without problems.

Interesting. So throw the dice and hope it works? I'm not a fan of that style of event production. Can a composite video signal travel farther with out problems than s-video?

Question for you, are the DVD orders guaranteed? I shot a local beauty pageant with the same set-up, contestant will buy DVDs, I am selling DVDs at $ 50 each, I am shooting 12 Contestants so basically I am making $ 600. In the end though, only the winner wanted a copy of the DVD. So unless it's guaranteed, I would walk away from it.

Orders are not guaranteed, but the contestants are all likely to purchase due to my previous experience with this group (also because the production value will be higher than all previous contests at this level.... usually they get a stationary cam with no mic feeds from house sound) . The contestants are choirs usually with about 30 people per choir. Asking $10 a disc is pretty simple and most choirs buy the disc and use it to eval their performance. This is a semi finals competition (divisions funnel into districts and districts to internationals). The top three in each (quartets & choir) go to the international competition this coming summer.

Hey Jason,

Sounds good then. The organizer of the beauty pageant approached me again last year, they are saying it's guaranteed. I asked them to buy whatever is not sold as a guarantee and they walked away.

About the cabling, would it make sense to do a mock set-up? See if you ran into problems? About the switcher, can you rent one locally? Maybe you can try it out and see if it will work, we rent out MX-70s for $ 350, should be the same price in the USA.

Jason -
Have you considered taking disc orders, doing a synched edit from multiple cameras, then delivering discs a few days later? I have found that doing the transaction at the time of the event (getting the money from customers) is crucial to maximizing sales but that people are perfectly OK waiting, a little, for discs. This obviates the need for lots more equipment plus editing, titling, chapter marking, disc label, etc., make for a much better product!
I prepare a 2-part form and make copies: I retain the left side as a sales record and mailing label (filled-out by the customer) and the right side is an image of what the disc will look like and the customer takes that away with them as a tangible receipt. I had been hand-delivering but for the last event I got smart and simply mailed discs in a rectangular (not square because it costs more to mail) sleeve made from folded tag board with the shipping label tapped on and two 42¢ stamps affixed. This is a very low cost mode of shipping.

Jason - Have you considered taking disc orders, doing a synched edit from multiple cameras, then delivering discs a few days later? I have found that doing the transaction at the time of the event (getting the money from customers) is crucial to maximizing sales but that people are perfectly OK waiting, a little, for discs. This obviates the need for lots more equipment plus editing, titling, chapter marking, disc label, etc., make for a much better product!

I have suggested that to the contest organizers, but part of the requirements for the video, is that the dvds be available a few hours after the competition so the judges can go through the video with the contestants as a "post-op" and explain why they got scores X,Y,Z. The same goes for the directors. The directors actually have a special master class with the judges to analyze the chorus director's performance. So the DVDs are actually needed right away.

I prepare a 2-part form and make copies: I retain the left side as a sales record and mailing label (filled-out by the customer) and the right side is an image of what the disc will look like and the customer takes that away with them as a tangible receipt. I had been hand-delivering but for the last event I got smart and simply mailed discs in a rectangular (not square because it costs more to mail) sleeve made from folded tag board with the shipping label tapped on and two 42¢ stamps affixed. This is a very low cost mode of shipping.

Very interesting shipping idea. I'll keep that in mind should the contestants be willing to skip the masterclass sessions.

Hey Jason,

Sounds good then. The organizer of the beauty pageant approached me again last year, they are saying it's guaranteed. I asked them to buy whatever is not sold as a guarantee and they walked away.

About the cabling, would it make sense to do a mock set-up? See if you ran into problems? About the switcher, can you rent one locally? Maybe you can try it out and see if it will work, we rent out MX-70s for $ 350, should be the same price in the USA.

I will absolutely be doing a mock setup at my home to test everything. Hopefully a week prior so I have time to buy any emergency supplies.

Unfortunately there are NO other av suppliers in the valley. The only one that I know of, hasn't been answering their phones for the past few weeks.

Hey Jason

I would stay away from the Videonics stuff and look at a Panasonic mixer. There are several on Ebay right now for under $5oo. Before I started using Newtek products, I used these extensively without one problem. As far as S Video cable runs, I wouldn't go more than 100' without some boost. However, if you do go more, make sure to get a high quality cable like what you can buy at SVIDEO.COM. They also have some interesting solutions using cat 5 cable with S Video baluns. Theoretically you can run these several hundred feet with no signal loss. I have a friend of mine who does NCAA webcasts all over the country sending YC down a cat 5 line up to 500'.

Mick Haensler
Higher Ground Media

Hey Jason

I would stay away from the Videonics stuff and look at a Panasonic mixer. There are several on Ebay right now for under $5oo. Before I started using Newtek products, I used these extensively without one problem. As far as S Video cable runs, I wouldn't go more than 100' without some boost. However, if you do go more, make sure to get a high quality cable like what you can buy at SVIDEO.COM. They also have some interesting solutions using cat 5 cable with S Video baluns. Theoretically you can run these several hundred feet with no signal loss. I have a friend of mine who does NCAA webcasts all over the country sending YC down a cat 5 line up to 500'.

Mick Haensler
Higher Ground Media

Are you referring to WJ-MX50 units, or a different kind of mixer. The Panasonic units seem ancient, though I don't know how their age compares to the MX-1 units.

I can attest to the cat-5 and Baluns connectors solution - use it all the time for runs over a hundred feet.

Videonics are okay - but used units can have hidden flaws. Might not show up till they've been on for a little while. Basically, buying a used switcher is going to be dicey unless you have time to give it a thorough shakedown before hand, so make sure you get a return policy and enough time to find another one.

Tricasters are great but out of your budget unless you can rent. Find out if that's possible.

Are you referring to WJ-MX50 units, or a different kind of mixer. The Panasonic units seem ancient, though I don't know how their age compares to the MX-1 units.


Yep that's the one. They are old but in my experience, pretty reliable. I still borrow one from a friend of mine on occasion when I need a backup on a tight budget show. All I can say is I've never had an issue. That being said....buyer beware when buying anything used.

Mick Haensler
Higher Ground Media

Yep that's the one. They are old but in my experience, pretty reliable. I still borrow one from a friend of mine on occasion when I need a backup on a tight budget show. All I can say is I've never had an issue. That being said....buyer beware when buying anything used.

Mick Haensler
Higher Ground Media

yes I'm always a little wary. Do you remember if the unit can do PiP? I have been reading through the manual and I cannot find a reference to PiP anywhere. IF not PiP, then split screen. I need to be able to put a camera feed from backstage as PiP or top 1/3 (etc etc) on top of a wide angle of the stage. IS that possible with the Panasonic unit?

Don't have their manuals in front of me, but as I recall almost all of the units will do a 'corner wipe' PiP sort of deal. So it's probably possible as a transition at the very least. But again, check to make sure it 'grows' in instead of 'flows' in. In other words a corner wipe that enlarges the other shot out of the corner instead of revealing the other shot from out of the corner.

yes I'm always a little wary. Do you remember if the unit can do PiP? I have been reading through the manual and I cannot find a reference to PiP anywhere. IF not PiP, then split screen. I need to be able to put a camera feed from backstage as PiP or top 1/3 (etc etc) on top of a wide angle of the stage. IS that possible with the Panasonic unit?

I honestly don't know. I've never had need of that feature.

Mick Haensler
Higher Ground Media

I have received confirmation that the s-video cable run needs to be around 250' to go from on stage, down the side, into a tunnel, and up the audience seating area to the AV platform in the back. The AV tech I talked to seemed to think that no boosters would be needed, but there is no way I'm buying a single 300' cable (would be useless to me for anything else). However, 3x100' cables would be useful, so now I need to test and see if that much cable causes signal problems for our on stage camera.

Anyone have experience running video 300' in any format? If so, what cable did you use? I'm not tied to S-video, but from what I can tell, s-video is cheaper to run longer distances than RGB, Coax, BNC, composite, etc. Is that correct? Picture quality really doesn't have to be great, since this would be for a PiP or split screen on a SD DVD burned live at the event (in other words, no two-pass rendering ,etc).

As stated, look into running via Cat-5 with Baluns connectors.

http://www.svideo.com/svideobalun.html

I do a fair bit of multi camera live switched stuff and have had VERY mixed results with DVD-R recorders. I've had a few outright failures in terms of being able to access the discs afterward. FYI.

I do a fair bit of multi camera live switched stuff and have had VERY mixed results with DVD-R recorders. I've had a few outright failures in terms of being able to access the discs afterward. FYI.

I've had one with digitally garbled audio. Wish I'd run it in to a DV tape or FireStore as well as the DVD recorder. Needless to say it was the final Act of the last night of a week of performances. Any other part wouldn't have mattered so much. Next time I do double audio just to be sure. Moral: if it can happen - it will, sooner or later.

For sure Murphy will rule in any live event situation. Double redundancy is always a good idea. When we do remote, we record to the hard drive of the Tricaster, A DVD-R copy in a seperate burner, and a S-VHS tape all in the portable flypack. This is in addition to broadcasting direct to Comcast and streaming over the internet.

Expec the unexpected. Remember, if you have a loss of power, most DVD-R burners will lose your disc - you won't be able to finalize what you have on it. So its best to keep your burner on a UPS in such an emergency.

I do a fair bit of multi camera live switched stuff and have had VERY mixed results with DVD-R recorders. I've had a few outright failures in terms of being able to access the discs afterward. FYI.

I did a dry run last night with the newly purchased Toshiba D-R410. (http://www.jdoqocy.com/click-3171575-10440897?url=http%3A%2F%2Fwww.newegg.com%2FProduct%2FProduct.aspx%3FItem%3DN82E16882116124%26nm_mc%3 DAFC-C8Junction%26cm_mmc%3DAFC-C8Junction-_-DVD%2BRecorder-_-Toshiba%2BAmerica-_-82116124&cjsku=N82E16882116124) Pretty nice. Worked with out a problem. S-video in and out (complete pass through too so if the unit is off, the input L1 just gets passed right through). It also has 1394 on the front (along with s-video, and the three RCAs). I haven't tested the 1394 yet and probably won't ever unless I am burning straight from one camera.

I burned at SP mode (2hrs on a single layer DVD-r) and then the final 30 seconds of the disc on XP mode (1hr per single side disc). Seemed to work just fine. Finalization took a minute, which is when the player creates menus for each recording session.

I'll be testing it in a realistic setup of the upcoming concert to see if it can do 8min burns and then finalize fast enough to be done in time for the next group. I will be keeping an eye on compatibility issues like you mentioned, and hopefully only using Sony DVD-R discs and only burning at the normal XP more (1hr per single layer disc) will eliminate many of those problems.

We will actually have two of these DVD recorders on hand in case finalization takes too long with one. Then we will switch to the second burner and let the first finish.

Expec the unexpected. Remember, if you have a loss of power, most DVD-R burners will lose your disc - you won't be able to finalize what you have on it. So its best to keep your burner on a UPS in such an emergency.

I already have a small PC UPS lined up just for the burner and should be able to power it for a minute or so. I also have a much larger UPS (1000VAmp) for the live mixer, webcaster, & backup PC that can probably last 3 minutes or so with all three attached (may be).

I use S-Video/Stereo Baluns from Black Box Canada $153Cdn per pair. I've run a 1000' of Cat5 without any loss in video quality.

S-Video/Stereo Balun - Blackbox Canada (http://www.blackboxcanada.ca/Catalog/Detail.aspx?cid=1578,1850,1851&mid=5175)

hey, I'm totally new at this, so I'm wondering...(if someone can fill me in)

I'm trying to do something similar, only I don't need to edit right away. I just wanna run three cameras into one monitor/laptop/computer for overseeing purposes during a live event shoot.

my question is, what would be the best way to go about doing this?
I was told by one source that I would need a switcher.

I'm totally green. and most of this stuff (switchers and stuff) is a foriegn concept

If I need a switcher, what would be a good one to buy? (I would rather not spend over $1000)
How do switchers work?

sorry for asking so many stupid sounding questions, but that's how I learn things.

Thanks


BTW Jason,
This Event you are talking about wouldn't happen to be a SPEBSQSA event would it?
Just wondering.