I just bought my canon a week ago and I can't decide on a hard case to store it in. Any suggestions are appreciated. Something that is not too expensive.

I use Storm Cases.

I have heard good things about the Pelican 1610. You can get an XL 2 foam cutout for it as well. I had the 1510 which was perfect for flying but I had to toally break down the camera to get it to fit which does not work for me. I just ordered this kit from B&H.

Petrol | PCCB-2N Camcorder Bag Kit | B&H Photo Video (http://www.bhphotovideo.com/c/product/399835-REG/Petrol__PCCB_2N_Camcorder_Bag_Kit.html)

I am hoping it will work. Their site said it fit the XL 2 assembled which should be the same size and it comes with a rain cover but it is a soft case.

Hey thanks. Let me know how that works out for you. I was thinking about that magna case that is similar to the 3200 canon hardcase. Its on ebay for like 200 bucks, compared to canons 400-500. I just bought a pelican 1700 case for all of my audio equipment. Can't wait till it arives!

I was 2 seconds away from trying that Case but I could not pass up the deal to get a case and rain cover for a little more than the cost of a rain cover. Time will tell if it was money poorly spent.

You guys might want to check out Cinevate's new hard case, it's been added recently in their products lineup. Design's pretty similar to Pelican cases for a bit less moolah. Dimensions are about 26" x 16" x 8", which seems a good fit for the XLH1a and some accessories.

I have heard good things about the Pelican 1610. You can get an XL 2 foam cutout for it as well. I had the 1510 which was perfect for flying but I had to toally break down the camera to get it to fit which does not work for me. I just ordered this kit from B&H.

Petrol | PCCB-2N Camcorder Bag Kit | B&H Photo Video (http://www.bhphotovideo.com/c/product/399835-REG/Petrol__PCCB_2N_Camcorder_Bag_Kit.html)

I am hoping it will work. Their site said it fit the XL 2 assembled which should be the same size and it comes with a rain cover but it is a soft case.

Josh,

I am looking at the Pelican 1510 myself since I really need a hard case that can pass through international "carry on" policies. I will be taking very light gear just the camera. Did you have custom foam made by pelican? Did you have any problem traveling international flights?

I have flown on about 15 flights with the 1510 international and did not have any issues except once when flying in business class on the 2nd level of the plane. The over head bins are very small and cannot hold the 1510. In that situation the 1510 was removed from my hands and allowed to fall down the stairs and be stored in over head bins on the 1st floor. I nearly shot the flight attendant who dropped it down the flight of stairs but the case did its job and protected the camera. I was uneasy with it not being in my sight but that was the only time I had trouble with it.

Also, I had to cut my own foam with my A1. For what it is worth I never full cut the foam for the XL-H1A as i switched to a soft bag that could keep it fully assembled minus the lens hood. I do have a trip coming up soon and I may look back into traveling with it broken down again.

I have flown on about 15 flights with the 1510 international and did not have any issues except once when flying in business class on the 2nd level of the plane. The over head bins are very small and cannot hold the 1510. In that situation the 1510 was removed from my hands and allowed to fall down the stairs and be stored in over head bins on the 1st floor. I nearly shot the flight attendant who dropped it down the flight of stairs but the case did its job and protected the camera. I was uneasy with it not being in my sight but that was the only time I had trouble with it.

Also, I had to cut my own foam with my A1. For what it is worth I never full cut the foam for the XL-H1A as i switched to a soft bag that could keep it fully assembled minus the lens hood. I do have a trip coming up soon and I may look back into traveling with it broken down again.

Josh I really appreciate the info. Thanks it helps. I will try it out on a flight to Miami in a couple of weeks. I will be shooting an event there.

Sounds good. Im looking to see if I can get some new foam locally to use. Otherwise I have to have it shipped from B&H

I was 2 seconds away from trying that Case but I could not pass up the deal to get a case and rain cover for a little more than the cost of a rain cover. Time will tell if it was money poorly spent.

Let us know how you like it after some use! Thanks!

Well I have had it a little while now and As I said, It is nearly ready to go out of the bag, I think it could be if I did not have the metal bracket attached to it.

Right now I have to turn the microphone backwards, and take off the lens hood. One side pouch contains zip lock bags full of all my cables and the other holds the rain cover. Overall I like it. I don't fell as safe as I did with the hard case but it is still a fairly solid case. I will have to take some pictures of everything in its place and send them along.

I will have to take some pictures of everything in its place and send them along.

Please do if you have time.

I'll echo the recommendation for Pelican. Although I use a Petrol soft case for my XH-A1, I've been using Pelican for minicams for years. They are very secure and let you configure secure spots for your accessories.

Highly recommended.

...
Although I use a Petrol soft case for my XH-A1
...


Would you recommend this case for using with the xh-a1? I just got mine a few weeks ago. I don't really have any accessories yet for the camera except the at-822 that will be (most probably - still doing research) mounted via an sm4.

Please do if you have time.

Sorry about the delay.

Here you go!

I do like the bag. Things are snug but I can get everything i need to shoot in one bag. The side pouch holds all my cables in zip lock bags. The other pouch holds the rain cover and a few filters. the rest goes into the main body to the left of the camera in the divided areas.

Thanks Josh that looks perfect!

So after a few trips with the Pelican 1510 I can honestly say it is great. It fits easily in the overhead bin of the airplane. I love that it has wheels because having to carry a tripod and another digital camera and small hd handheld camera it makes things easier. I am taking it on its first international trip soon but I do not expect any problems.

I had to pick and pluck the foam and now the pieces are not staying together easily. I might have to get some more foam soon. You can fit the whole camera in with two batteries and wireless mics in the case.

I had the same issue about the foam. I remember reading though, that with a bit of spray adesive and a night to dry, the foam is much more sturdy.

Good morning,


I have two cases that the xlh1 will fit well into.

I use the porta brace backpack, believe it is bp 502 or 302. It carries the camera set up and ready. I carry a 100- 400 zoom a 200mm macro, Lens adapters, filters, diopters, four 945 batteries, 910 battery mount for rear, Tapes, white card cables and there is room for more if one wants. It mostly sets on my back seat and is always ready to go. I doubt if it is carry on even if it is a back pack. If I wear it it has great shoulder straps and a support belt as well. You can also put a dolly on it for wheels.

I also use the porta brace that is made for the xl2. It holds the camera assembled and ready to go. It can carry battteries tapes and a few odds and ends. for regular use I never put things loose in the camera compartment (I will lose something for certain). But for traveling you can stuff quite a bit in it!! It will go on the airlines. this case has hard protection for the view finder!! If traveling by plane or vehicle when not shooting I think I would disconnect the fu1000 to be safe!!

I am totally satisfied with them.

I need a Lockable, waterproof, breathable hard case, suggestions???

Good morning,


I have two cases that the xlh1 will fit well into.

I use the porta brace backpack, believe it is bp 502 or 302. It carries the camera set up and ready. I carry a 100- 400 zoom a 200mm macro, Lens adapters, filters, diopters, four 945 batteries, 910 battery mount for rear, Tapes, white card cables and there is room for more if one wants. It mostly sets on my back seat and is always ready to go. I doubt if it is carry on even if it is a back pack. If I wear it it has great shoulder straps and a support belt as well. You can also put a dolly on it for wheels.

I also use the porta brace that is made for the xl2. It holds the camera assembled and ready to go. It can carry battteries tapes and a few odds and ends. for regular use I never put things loose in the camera compartment (I will lose something for certain). But for traveling you can stuff quite a bit in it!! It will go on the airlines. this case has hard protection for the view finder!! If traveling by plane or vehicle when not shooting I think I would disconnect the fu1000 to be safe!!

I am totally satisfied with them.

I need a Lockable, waterproof, breathable hard case, suggestions???

I just got back from shooting in Grenada, Nicaragua and the Pelican got bounced around alot and it was still fine. The foam is really taking a beating though from pulling the camera in and out. I think I will try to reinforce the foam with the suggestion above.