James Huenergardt
July 29th, 2008, 02:58 PM
Hi,
I just purchased a second EX1 and wanted to see what firmware version it was running.
I looked all through the menus and couldn't find anything on it.
How do you view what firmware version the camera is running?
Thanks,
Jim
George Kroonder
July 29th, 2008, 03:13 PM
It's in the maintenance menu. Press and hold MENU and CANCEL on the rear of the camera, then press SEL/SET to access.
George/
Jurgen Taghon
July 29th, 2008, 04:08 PM
When will it be possible to update to a newer version of the firmware for the ex1 by the yourself?
And what makes the difference with newer firmware.
thanks jurgen
Ronn Kilby
July 29th, 2008, 05:00 PM
Strange. Since I got my EX-1 back from Sony Repair, the "Menu/Cancel/Sel-Set" does not display the Maintenance Menu. I'm sure they updated the firmware but I can't check it.
Brent Ethington
August 23rd, 2008, 12:32 PM
I just found that the procedure is: Press and hold the "CANCEL" "SEL/SET" and "MENU" buttons simultaneously.
Juan Solorzano
December 6th, 2008, 10:57 AM
I recently sent my EX1 to the local Sony service center for the firmware upgrade. When I got it back I wanted to be sure they installed the latest one (1.11) so I pressed Menu_Sel/Set_cancel. Everything fine..
Now is there a way to hide the maintenance menu again.. since I donīt want one of the videographers I worke with messing with it?
Erik Phairas
December 6th, 2008, 11:08 AM
I just found that the procedure is: Press and hold the "CANCEL" "SEL/SET" and "MENU" buttons simultaneously.
on my ex3 I had to do this. All three. Removed by shutting the camera off.
V1.02_0078