Hi there,
I'm getting different opinions re the best mic to use with the Sennheiser EW112-G2s I just ordered. The guy at the store says to buy Sanken COS-11,
a guy at the CBC, where I used to work, says to get Trams.
But neither the guy at the store nor the guy at CBC has used an EX-1.
Would any of you EX-1 users (and audiophiles) mind giving me your opionions?
thanks,
Malcolm

Doesn't this already come with the VT500 lav? Of course I think the COS 11 is the best lav mic around but I think you'll have determine that based on who you put the mic on.

thank you, Doug. I take that as a pretty positive vote for the COS-11. I'll wait to see if I hear from any Tram users before finalizing my order. (I don't know what you mean about the VT500)
Cheers, Malcolm

I have a bunch of G2 100 sets. I was going to buy COS-11's for each, then decided on the Sen MKE2 Gold (Mfr# MKE2-EW GOLD). They are already fitted with a mini jack and draw the power required from the Sen transmitter. Suits my intended use.

Christopher - - don't the COS-11s also draw power from the transmitter?
Malcolm

They either go with phantom or need 48v power depending on the model you get.

I don't know what you mean about the VT500

The VT500 is a lav mic that is supposed to be part of that Sennheiser EW112-G2 package.

Malcolm, you could be right. I am not sure how the wiring of the COS-11 would be done to allow this.

I was under the impression that you may have to use the large XLR component, that contains a AA battery, then convert XLR to mini jack for input to the Sen transmitter? If so, it seemed too bulky for my intended use.
http://www.sanken-mic.com/upload/prd/img/1005900.jpg

These are my assumptions, so perhaps someone with COS-11 experience can confirm the wiring and power configuration for a COS-11 to G2 100 transmitter. MKE2-Gold, plug and play.

With the COS 11's you can get the model with a stripped end basically if you have the electrical know-how (or in my case know someone who is smart) you can 'convert' the cable to the 3.5mm plug. They come with either 1.6 meter or 3 meter cabling. If I recall correctly it really wasn't very difficult but I didn't do it.

With the Sennheiser G2 series you won't need battery power, phantom will come from the transmitter.

If putting the 3.5mm plug on is daunting, then I would recommend the Sennheiser MKE2 Gold lavs that Christopher Barry is using.

I bought two used MKE2's off of eBay and soldered them myself. I'd recommend getting the locking 1/8" TRS plugs if you go this route. Also, the G2 transmitters do NOT provide 48v phantom power. I believe it is provided in some of the higher level Senn wireless systems.

Ack! You're correct Dave the G2 line doesn't provide 48v except for the plug on transmitter for handheld mics.

My only excuse I can give is old age! I haven't done production work for 2 years now, only post production. Sorry about the wrong information!

Guys I think I'm going to be o.k.. Wouldn't dare wire anything myself - - the audio place (Trew) where I'm getting this gear is going to replace the lav mics that the Sennheiser RFs come with, with the COS-11s. They'll do the wiring, and I'm pretty sure they wouldn't have recommended this if they didn't think it would work out well.
I'm surprised no one's commented on the Tram TR50... I thought it was in widespread use. Anyone?
Malcolm