Hello,

Newbie in need....

running out about to shoot this afternoon and have run into an audio question.

Using two mics, Senn 416 on a boom and a Rode Ntg-1 on the camera. ( Channel 1 and channel 2) Can I choose an audio output to my head phones so that I only hear the Channel 2( Boom mic) ? Without of course altering the mix as I have it set onto the tape.

Thanks
Jonathan

Hello,

Newbie in need....

running out about to shoot this afternoon and have run into an audio question.

Using two mics, Senn 416 on a boom and a Rode Ntg-1 on the camera. ( Channel 1 and channel 2) Can I choose an audio output to my head phones so that I only hear the Channel 2( Boom mic) ? Without of course altering the mix as I have it set onto the tape.

Thanks
Jonathan

The only way I know of would be to have a mono pair of headphones which are available at radio shack I think. Then whatever channel the headphones choose, you'll have to plug the boom into that one. Or, a mono to stereo adapter at radio shack could also work...