We are about to leave for a wedding.. and..

The SDI-Out with a BNC cable out into the BNC in on monitor on the flyer and we are getting no signal... It doesn't matter if it's set to SD or HD on the camera..

Any suggestions?

Hi John

Check under the 'Others' menu that I-Link I/O is set to disable. If this is enabled, it disables SDI.

Cheers,

Nick

The standard flyer monitor is composite only.

The standard flyer monitor is composite only.


So there is no way to get the SDI out port to work with the standard flyer monitor? We would then need to find another output on the camera?


Nick, When we turned it off, we got snow for a second and then back to No Signal.

The standard Flyer monitor does not accept an SDI signal. You have to use the composite output cable on your EX1, and plug a RCA to BNC adapter to hook it into your sled's BNC connector.