View Full Version : FCP plug-in has been released !! for M2T & DV file import


Kenny Pai
March 20th, 2008, 01:03 AM
Here:

http://www.sonybiz.net/biz/view/ShowContent.action?product=HVR-DR60&site=biz_fr_EU&category=HDVVTRs&contentId=1205247708665&sectiontype=Product&preserveContext=true

Sean Hsieh
March 20th, 2008, 01:45 AM
thanks kenny :) has anyone tried this plugin yet? haven't received my unit yet to test the import functionality on, but i'm guessing this is used for simple drag & drop to your FCP bin?

Hedley Wright
March 20th, 2008, 04:28 AM
Does anyone know whether a solution for FCE is likely to happen?

Michael Liebergot
March 20th, 2008, 08:13 AM
thanks kenny :) has anyone tried this plugin yet? haven't received my unit yet to test the import functionality on, but i'm guessing this is used for simple drag & drop to your FCP bin?
Not sure about it yet. But it did mention in the text that you had to use FCP's "Log & Capture" to bring the footage in.
Hopefully this means drag and drop and not normal logging in of footage and capture in real time.

Johann D.K. Cerecke
March 26th, 2008, 07:53 PM
I think it uses the 'log and transfer' window actually, which does mean drag n drop.

Benjamin Nasse
May 7th, 2008, 07:56 AM
I am thinking about getting a couple of these to speed up workflow with my v1u. I was wondering what the time difference is between using the log and transfer versus using tape and the log and capture.

Thanks
Ben

Tim Dashwood
May 7th, 2008, 09:02 AM
I am thinking about getting a couple of these to speed up workflow with my v1u. I was wondering what the time difference is between using the log and transfer versus using tape and the log and capture.

Thanks
Ben

There is a HUGE difference in the time it takes. A 60 minute tape will always take at least 60 minutes to log and capture from tape, but that same amount of footage on a CF card could be logged and transferred in a matter of a few minutes, depending on how fast your CF card is.

Bruce G. Cleveland
May 7th, 2008, 09:15 AM
Here:

http://www.sonybiz.net/biz/view/ShowContent.action?product=HVR-DR60&site=biz_fr_EU&category=HDVVTRs&contentId=1205247708665&sectiontype=Product&preserveContext=true


Is this the same plugin that has been out for a month or so now or a diffrent one?

Bruce

Mihali Moore
May 7th, 2008, 01:28 PM
Hi there all,

I spoke to Sony and this is a new plug in. I have Final Cut 6.03 and I can capture the footage in real time when playing back from the device. (I press menu, chose HDV and press play, so I assume the device is not in "computer mode") However, when I do this a dialogue box comes up saying that I didn't remove the device properly?!?! Seems to work though. However...

...I can't figure out for the life of me how to import/drag and drop the files to increase the transfer rate of my footage.

Has anyone done this high speed capture successfully and if so, what settings do you have on your capture presets?

Mihali

Gary Nattrass
May 7th, 2008, 06:04 PM
Hi there all,

I spoke to Sony and this is a new plug in. I have Final Cut 6.03 and I can capture the footage in real time when playing back from the device. (I press menu, chose HDV and press play, so I assume the device is not in "computer mode") However, when I do this a dialogue box comes up saying that I didn't remove the device properly?!?! Seems to work though. However...

...I can't figure out for the life of me how to import/drag and drop the files to increase the transfer rate of my footage.

Has anyone done this high speed capture successfully and if so, what settings do you have on your capture presets?

Mihali

At the moment I can not use this CF unit with my FCP apple set-up. I am on leopard 10.5.2 and using the sony 1.01-1 plug in. I am getting really annoyed at this as sony dont seem to want to fix this the retailer creative video dont know and apple just blame the other two mentioned.

Winston Cutshall
May 8th, 2008, 12:43 AM
Kenny, thanks for the link!! I’m running System 10.4.11 with FCP 6.0.3, using 16gb Sandisk Extreme III cards with an Extreme IV firewire 800 reader - and it works flawlessly from the “log and transfer” dialogue. Now all we need is preview and mass metadata editing, and we are beating P2 hands down!

Clemens Fischer
May 8th, 2008, 03:13 AM
Kenny, thanks for the link!! I’m running System 10.4.11 with FCP 6.0.3, using 16gb Sandisk Extreme III cards with an Extreme IV firewire 800 reader - and it works flawlessly from the “log and transfer” dialogue. Now all we need is preview and mass metadata editing, and we are beating P2 hands down!

i am using the same cards and reader, but having always trouble with some files.. do you have the same problems?

thanks
clemens

Winston Cutshall
May 9th, 2008, 01:15 AM
Clemens, Not as of yet. I will be shooting much more in the coming days, and will follow up if I begin to get errors

Mihali Moore
May 10th, 2008, 09:21 AM
I have managed to work out how to log and transfer data from my CF card to final cut pro 6.0.3.

However, it seems that even when I shoot in 25P on my Z7, the clip settings do not match my sequence settings which I have set to HDV 1080p25. Final Cut asks if I want to change the settings to match my clip settings. When I say yes, the sequence turns into HDV 1080i50.

I have also noticed, that in the compressor column in my browser all the clips have HDV 1080i50.

Am I missing something in the log and transfer window? (My audio/visual setting in the menu are set to HDV 1080p25). I can't seem to find anything to alter capture settings.....

Johann D.K. Cerecke
May 12th, 2008, 08:59 PM
I think maybe the 25p it uses is actually a type of 50i where both fields are the same. This is so it can be edited as 50i, although I'm not sure why.

Zach Love
May 15th, 2008, 01:34 PM
can anyone preview in log and transfer?

I'd like to be able to just take portions of a clip & not the whole thing, but it looked like I couldn't set ins & outs, just drag an entire clip into the bin.

Jim Pyle
May 16th, 2008, 10:21 AM
Apparently not supported for .M2T files.