Art Conway
February 10th, 2008, 06:19 PM
Hey, everyone. I need some advice. I currently own a Panasonic DVX100A, and lately I've been considering placing it on eBay and using the money I get to purchase a Canon HV30.
Since SD seems to be going the way of the dodo, I want to start shooting HD ASAP. Originally, I was going to just save up for a HVX200 but I came across the HV20. Now, normally I'd have written off a camera so small, thinking it "too consumer" and not enough "prosumer", but after browsing around this site and seeing actual footage from the camera, I started to change my mind. Footage looked not only sharp and colorful, the 24p feature is what really sold me.
Also, if I were to get at least $ 2,000 for my DVX100A (I've got a bunch of accessories to go along with it), that alone would pay for the HV30 plus I could afford a few extras (namely a Canon WD-H43 wide angle lens and an extra battery or two).
My primary use will be to shoot short films as well as to attempt to shoot an entire feature film. By the way, I am already aware of the (minor) differences between an HV20 and HV30--basically the HV30 adds a 30fps mode and sports a black exterior. While I doubt I'll be shooting in 30fps (24p is what I'm aiming for) it would be nice to have it anyway.
So, basically, I'm curious if you guys think it would be advantageous for me to switch from my current DVX100A camera (a prosumer, 3CCD SD camcorder) for the HV20/HV30 (a consumer single CCD HD camera)?
Now, to be clear, I'm already aware of the features I'll be losing in this switch:
1) No XLR input/outputs--while I liked having them on my DVX100A, I have no problem recording high-end audio from my Sennheiser boom mike into a separate audio recording device or running it directly into a nearby laptop.
2) Easy 3:2 pulldown. Getting my DVX100A footage into 24p mode is a super easy but I've already read up on the slight difficultly 3:2 workaround involving getting the HV20 footage to be proper 24p.
But despite losing those things, I think the upgrade from SD to HD will be worth it.
Now for my concerns:
1) No manual focus ring--Since I'm used to working with the DVX100A, which has a manual focus ring, I've come to except to be able to switch focus from an object in the foreground to another in the background on the fly. Is this at all possible with the HV20/HV30? Even if it can't be done on the fly, so to speak, please tell me there is a way disable the camera from trying to automatically focus on whatever is in front of the lens.
2) The whole 3:2 pull down problem--as I mentioned earlier, I have read up on this issue and the hurdles you have to jump through to get this corrected. From just glancing at the threads, it seems like getting the footage to work with Premiere Pro CS3 and After Effects CS3 (I'll be doing all post work on a PC) is a bit of a chore. Now, I wouldn't mind this at all if I can batch convert all files before editing into proper AVI or MOV files but if it is something I have to constantly be fixing and messing with, then this worries me. So, are my concerns un-founded?
Please let me know what you guys think.
Thanks,
-- Art
Since SD seems to be going the way of the dodo, I want to start shooting HD ASAP. Originally, I was going to just save up for a HVX200 but I came across the HV20. Now, normally I'd have written off a camera so small, thinking it "too consumer" and not enough "prosumer", but after browsing around this site and seeing actual footage from the camera, I started to change my mind. Footage looked not only sharp and colorful, the 24p feature is what really sold me.
Also, if I were to get at least $ 2,000 for my DVX100A (I've got a bunch of accessories to go along with it), that alone would pay for the HV30 plus I could afford a few extras (namely a Canon WD-H43 wide angle lens and an extra battery or two).
My primary use will be to shoot short films as well as to attempt to shoot an entire feature film. By the way, I am already aware of the (minor) differences between an HV20 and HV30--basically the HV30 adds a 30fps mode and sports a black exterior. While I doubt I'll be shooting in 30fps (24p is what I'm aiming for) it would be nice to have it anyway.
So, basically, I'm curious if you guys think it would be advantageous for me to switch from my current DVX100A camera (a prosumer, 3CCD SD camcorder) for the HV20/HV30 (a consumer single CCD HD camera)?
Now, to be clear, I'm already aware of the features I'll be losing in this switch:
1) No XLR input/outputs--while I liked having them on my DVX100A, I have no problem recording high-end audio from my Sennheiser boom mike into a separate audio recording device or running it directly into a nearby laptop.
2) Easy 3:2 pulldown. Getting my DVX100A footage into 24p mode is a super easy but I've already read up on the slight difficultly 3:2 workaround involving getting the HV20 footage to be proper 24p.
But despite losing those things, I think the upgrade from SD to HD will be worth it.
Now for my concerns:
1) No manual focus ring--Since I'm used to working with the DVX100A, which has a manual focus ring, I've come to except to be able to switch focus from an object in the foreground to another in the background on the fly. Is this at all possible with the HV20/HV30? Even if it can't be done on the fly, so to speak, please tell me there is a way disable the camera from trying to automatically focus on whatever is in front of the lens.
2) The whole 3:2 pull down problem--as I mentioned earlier, I have read up on this issue and the hurdles you have to jump through to get this corrected. From just glancing at the threads, it seems like getting the footage to work with Premiere Pro CS3 and After Effects CS3 (I'll be doing all post work on a PC) is a bit of a chore. Now, I wouldn't mind this at all if I can batch convert all files before editing into proper AVI or MOV files but if it is something I have to constantly be fixing and messing with, then this worries me. So, are my concerns un-founded?
Please let me know what you guys think.
Thanks,
-- Art