lcd monitor question.

i connectect the hc7 with provided cable gettings signall/ picture, but only in b/w

where is my mistake?

tes: connected the hc7 to a tv, same thing, just b/w

thanks

Are you using component or S-video or composite?

If you're using component, component was not meant for a composite input on a TV.

If you're using S-video (just in case you have S-video), check the connectors on the cable and the TV to see if one of the pins are bent on the S-video terminal.

If you're using composite, the camera might need servicing since the composite output is always color.

Also, check the color system your TV and camera are in. If they don't match (Example: PAL on NTSC) you can't use the camera with a NTSC TV.

Also, if using the R/G/B cable (component), if you get two of the wires mixed up, it will be in B&W or some strange color - check those are in the right order... it's REALLY easy to mix them up behind a TV while hanging upside down <wink>!

well, here it is.
had enough time to try everything out and it works. i worked myself thru the settings, tried a different lcd monitor, and i am getting a color signal.
the ch7 has a a/v out and a composite out.

i guess my mistake was, the varizoom lcd has a 1/8 a/v in (1/8 plug) in front, but also a bnc (red/ white) in the back.

thanks guys for your help..

well, here i am again...

can't figure it out...help


hc7 connected to sony walkman700, getting a color signal. great

but i also would like to go from walkman to lcd monitor, but there i get only a b/w signal ?

anybody?

(happy thanks giving)

This must be a problem with your monitor. Try it on a TV.

This must be a problem with your monitor. Try it on a TV.


monitor is ok. been trying all variations. did a online chat with the sony help...wow no help. the guy did not know about the 700 walkman at all.

mh, i don't have one, but could i use a y cable?