Need one ASAP.

Will also take anything that can be carried onto a plane and hold a Camcorder, DSLR, and laptop.

Thanks

Purchased the unit a while ago, checked its operation 3 mos. ago; fully functional. It is iRiver 795 w 256 mgb of memory, more than enough for a wedding. The unit was new in the package w Quick Start Guide, Operating manual, Music Manager manual & software on CD.

Bought it to record couples vows at wedding, never used it. This is one of the units that an electret lavaliere mike will work with. All for $65- postage included.

Wasn't sure. Sorry.

Nicole

Price lowered to $3,800!

(plus shipping)

Hi Dave,



It's an ifp-899. I can tell it's not the screen, but a connection somewhere, cause if I press on the lcd, some of it comes back to life. I took apart a dead one I had to see if it would give me any clues, but as you said, it was tough to disassemble, and I didn't want to destroy the other one trying to fix it.



Don't knock yourself out, by any means. I just thought maybe you had come across this before.

Thanks for the reply. Much appreciated,

Vito

Definitely seen the problem before, including the intermittent if you press on the shell.

I suspect it's actually a bad screen, rather than in the ribbon cable or connections - it's a very complex assembly (don't know if you got the screen removed from the mainboard or not to see what under it?). If it IS in the actual screen, the only way to repair it would be to replace the whole screen/ribbon cable assembly. Strangely not a single one of the ones I've got has any lines that are "off" to experiment with! BUT I can see about removing a screen assembly - I have an idea if how it might be done, but it may take a custom attachment to a soldering iron, and even so, the ribbon cable is awfully delicate. IF I can sucessfully remove one, the "transplant" shouldn't be difficult.

In the end, if the display is readable (usually is, even with a few lines flaking), probably better to just use it as is.

I have an 8 series that has an audible hiss associated with all the audio files. My other one of the same model/settings/firmware doesn't have it. Do you know of any repairs or tricks for that?

I'll forward this link to a friend looking for some irivers as well.

Thanks for giving us first crack :)

First thing I'd double check is that the line/mic settings are the same in the menus - I seem to recall that the wrong settings can be a bit noisier, and there are several settings. Sounds like you've looked at that already, but that's the "easy fix"...

If that's not it, the likely cause is a faulty daughterboard, a tiny little board that sits under the mainboard and contains all the I/O circuitry... and a royal pain to get to unless you know the disassembly tricks. I don't think I have a "donor" that has a usable board, but I'll double check. I think the only 8 series I have that is "dead dead" was already scavenged for usable parts, but I'll check and let you know!

if you don't see "item is sold" in this thread... it's still for sale!

I am looking to trade my pilot listed on this same site for a dykortech advantajib... i would like to acquire the full kit with extensions cables and maybe even a 528xb tripod.

just putting it out there :)

Greg

Thought I had it sold, still available. $1400

Hey Dave,


In the end, if the display is readable (usually is, even with a few lines flaking), probably better to just use it as is.

Yep, that's pretty much what I had concluded. I've resigned myself to just never changing the settings for as long as it lasts. I can at least tell when it's recording, so it does the job for now. Too bad there's not an easy fix.

Thanks for your feedback and suggestions. Hope your sale goes well.

Cheers,

Vito

Not for sale

pulled

Thankyou

Doug

I found one new on the internet with free shipping and accessories for only
310.00

Doug

Email sent this morning. Still available?

Canon HV20 with low use - less than 5 hours. I bought this to use as a deck for my XHA1 but ended up with a Firestore so I rarely capture tape.

Does have one small surface scratch on the exterior, otherwise perfect. Comes with (1) battery and charger.

$450 obo.

jonah@efmarton.com

Matthews M25 Tripod in good condition with case and extra feet.

$125. obo

jonah@efmarton.com

Libec H60 Fluid Head that has seen some use. Pretty scratched up but I just had it into Libec for a service and it is working good. I was using it for a small jib and it worked great for that.

$400 obo

jonah@efmarton.com

Dave, I send you a PM last week. Didn't that reach you?

Sent PM. Please let me know if you got it. Thanks!

sold now ....Please delete

Renewed Criagslist AD Link

Office Share Hudson St (http://newyork.craigslist.org/mnh/off/1315146193.html)

Excellent Condition AG-LW7208. B&H price $389.95. Yours for only $195 +SH

ag-lw7208 | B&H Photo Video (http://www.bhphotovideo.com/bnh/controller/home?ci=0&shs=ag-lw7208&sb=ps&pn=1&sq=desc&InitialSearch=yes&O=jsp%2FdeadEnd1.jsp&A=search&Q=*&bhs=t)

lw at pictureframingschool.com

bump. $100. That's my lowest offer folks! The battery plate is almost brand new.

Thermodine XL- 2 case for sale mint conditions, it's in good shape. it has separations for lenses, batteries, tapes, etc. It has wheels and handles. $ 200 we accept credit card.


Blue Barn Pictures
533 clinton st.
suite 3A
Brooklyn, NY 11231-3335
Blue Barn Pictures (http://www.bluebarnpictures.com)

Kees, Ben,

Found them (my inbox is flooded, anyone got a firehose?), will get back with you shortly, I've got enough of these to "go around" I think, so should be able to work things out for you - will be in touch, I'm looking into an option to get some of the stereo lav pairs I'm currently using, I'd like another one or two myself, so going to try to buy in bulk and pass them along - nice mics, work really well with the iRivers.

Quartz King Dual Light with barndoors. Cord and switch in excellent condition. No Bulb, but this looks like the correct one for about 10 bucks:

FAD 120V 650W Light Bulb Replacement Lamp (http://www.replacementlightbulbs.com/lampfad.html)

$25 plus shipping.

jonah@efmarton.com

Email sent.

I found one new on the internet with free shipping and accessories for only
310.00

Doug

Ok? Where at?

Hey Brad,


Still for sale? I would like to purchase. Let me know when you get a second. Thanks!

Sounds good, just keep me posted. Thanks!

This camera is Sold

Bump... this is still available. I've been out on assignment a lot this summer and still need to find a home for this camera. Price lowered to $1800 OBO. No freight charges or insurance needed if you're local and can meet me for pickuip of the camera.

Thanks for looking.

Stuart

sale pending

After a lot of going back and forth on this, and I mean A LOT, I have finally decided to get rid of this kit for good. I just need to decide which direction to go from here with regards to replacing it. Anyways here's
a price breakdown for those who are interested:

EX1 with all original accessories, 1 8gb SxS card, and 1 hoodman, 8 lexar SSDs, & Azden $5100 + 50 shipping.

1 x bpu 30
2 x Hoodman SxSxSDHC adapters - $50 each shipped
2 x BPU 60s $185 each shipped
2 x 8gb SxS cards $175 each shipped

Azden SGM-1X shotgun mic. $110 shippped
all original accessories and box. I am willing to seperate some of the stuff, but I need to get the camera sold ASAP. Please add 3% for paypal. I will take pictures tonight of everything and add them.

I will also trade everything listed for a MINT HMC150 in original box with warranty card, all accessories and at least one big battery + $1800 cash.

Reduced to $175

#3 back on the market -- $2250

#1 still available -- $2000

UPDATE:

The Zoom hasn't officially been sold yet as I'm waiting on the first contact to do something about it. He has one more day to send the money. After that, it's open to the next contact in line. So on and so forth.
I have answered all emails thus far.

Thanks for the interest so far.

-Brad

Further Update: If you fall next in line for the offer and you don't respond within 24 hours, then you lose your spot.

CHECK YOUR EMAILS PEOPLE.

First thing I'd double check is that the line/mic settings are the same in the menus - I seem to recall that the wrong settings can be a bit noisier, and there are several settings. Sounds like you've looked at that already, but that's the "easy fix"...

If that's not it, the likely cause is a faulty daughterboard, a tiny little board that sits under the mainboard and contains all the I/O circuitry... and a royal pain to get to unless you know the disassembly tricks. I don't think I have a "donor" that has a usable board, but I'll double check. I think the only 8 series I have that is "dead dead" was already scavenged for usable parts, but I'll check and let you know!


Any word on the extra parts bro?

Sony V1U in great condition, used on two projects with hard drive (see below) so never used as playback deck. Hours are:
operation: 16 x 10
drum run: 6 x 10
tape run: 5 x 10
threading: 6 x 10
(for further explanation of the values, Google for a PDF of the V1U manual online, page 84)
Boxed.

Sony HVR-DR60 portable hard drive for above camera, excellent condition, boxed.

Raynox 180 Fisheye lens, excellent condition, boxed.

$3000 as a package. For local sale - Southern CA/AZ - buyer collects

Howdy folks,

I'm selling my Canon 5D Mark II (body only), and some accessories. I am in love with this camera, but need to sell it due to cash flow issues -- I'm very sad to see it go.

The camera is in very good shape. I have had it for only about 6 months, and the exposure count is very low. You can check out a couple of videos I made with it (The Laughing Stoic on Vimeo (http://www.vimeo.com/user1298382)).

Here's the list of things I am selling:

Canon 5D Mark II Body w/ original caps, box, cables, battery, strap, battery charger, documentation, and unfilled warranty card: $2,500.

Three (3) Sandisk Extreme III 8GB Compact Flash Cards: $40/ea
Three (3) *New* Canon 5d Mark II LP-E6 Batteries: $80/ea

Other accessories:

Hoodman Hoodloupe: $70
Redrock Micro Hoodloupe Mount (mounts underneath using tripod mount): $45

Buy the entire lot for $2,800!

Send me an email if you would like to make a serious offer! Prices are fairly firm.

Thanks,

-T.C.

No Offers?

I already bought a JVC HM 100 and in my opinion it blows away the hmc 150

The ex 1 is a great camera albeit the horrible ergonomics ugh . good luck to you


doug

I'll take it if your sale doesn't finalize. Thanks. -Mark

I haven't really used these lenses since I got my 5D2 so it's finally time to let it go. All lenses come have front and rear caps and all prices include shipping (USPS for Cont. US) + paypal. I don't check these boards/pm often so please email mindlee (at) gmail (dot) com.

Sigma 28mm f1.8 - $100 *SOLD*
This lens looks almost new. The focus ring is backwards like Nikons so you turn it clockwise for infinity.

Canon 50mm f1.8 - $40
Cool little lens. Extremely compact. Even though I have a 55mm f1.2, I still used this lens with 35mm adapter because of it size. Lens cap is chipped but still functional. See pictures.

Canon 85mm f1.8 - $120
Very good lens, have some minor dings and normal wear but the glass is clean. It has 55mm thread but I added a step up ring to 58mm to match my 28mm f/1.8 and 55mm f/1.2 and filters.

The next two are inexpensive lenses I used when I first got started with my 35mm adapter. They're not great but not bad either. The great thing about them is that they both used the Tamron adaptall system which lets you switch from Canon FD mount to Nikon F mount. They're priced so low that you would probably pay this much for the adapter itself. One of them have the Nikon adapter and other has Canon. Let me know which adapter you want.

Tamron 28mm f2.5 - $15 *SOLD*
Another very compact lens. Decent, vignettes a bit.

Tamron 35-80 f2.8-3.8 - $30 *SOLD*
This lenses is surprisingly good. The zoom ring is a little loose but function fine. It's a SP lens which is part of Tamron's better line of lenses. This one comes with a case.

And lastly, this is a feeler I'm not sure I'm ready to let go yet:

Canon 55mm f1.2 - ??
This is one I personally took apart and remove the click stops for the aperture ring. This is awesome when filming outdoors in cloudy days because I can smoothly adjust for changing light conditions. I'm not responsible if anything goes wrong aperture ring (which is partly why I resist selling it) but I did this over a year ago and it's still working fine. I'm currently using it with a Bower FD-EOS converter on my 5D Mark II. The focus ring is a little stiff. It's fine if you're focusing by hand but when using it with my Cavision follow focus and Redrock focus rings, it slips occasionally if not tighten down all the way. I wanna know how much people are willing to pay for it and if the right price comes along I might let it go.

I may be interested in the travel case. Do you still have it? Would you be willing to sell it apart from the Merlin?

Thanks,

Carrie

carriecannaday@mac.com

Interested. Sending an e-mail.

Looking to add to my SxS card collection for some shoots where I need more cards.

One 16GB or two 8GB cards.

aight, whosever might be interested in this, we can negotiate on the paypal thing.

Sigma 28mm, Tamron 28mm, and Tamron 35-80mm are sold.

Ethan you're right. Don't know why I jumped in, pointless. Good luck Scott. Fantanstic camera, wish I could afford it.

Since these were selling new for close to $550 less than a year ago this should be a tough sell. I purchased a used one with lots of extras for $450 6 months ago. Good luck!