I know this depends on the type of look that I need but I don't have a light meter at the moment and I like to know what would be the lowest footcandles
I need to get a good interview lighting.

I saw this LED light that give 123 Footcandles and uses only 12W . No heat!!!

I know this light are not the right temperature but I can do a white balance.
I know this are strobes but there most be away to fix that!
I know tat there are some professional video LED lights but they cost too much!!

Price around $170


http://www.chauvetlighting.com/fixtures/ledtechstrobe_fix.shtml

CONTROL FEATURES
# 3-channel DMX-512 LED white strobe light
# Blackout/static/dimmer/strobe
# Adjustable flash rate, dimmer and static in stand-alone via dipswitches
# Built-in automated programs via master/slave or DMX
# Built-in sound activated programs via master/slave or DMX
ADDITIONAL FEATURES
# Linkable with LED Techno StrobeTM-RGB, LED ShadowTM and COLORsplashTM200B in stand-alone
# Additional power output for daisy chaining units
# Includes brackets for wall and truss mounting
# Low power consumption
SPECIFICATIONS
# Beam angle: 20°
# Footcandles: 123
# Lux: 1,321
# Light Source: 192 (white) LEDs 100,000hrs
# Current draw: (peak 12W @ 120V) (inrush 24W @ 120V)
# Power: Autoswitching 100V - 240V 50/60Hz
# Weight: 4.9lbs (2.2kgs))
# Size: 14in x 9.75in x 6.5in
355.6mm x 247.65mm x 165.1mm
# 2-year limited warranty

I can see it working for a single person interview but not much more. Be warned that you will need to gel these lights to match ambient lighting and you'll lose a bit of power as a result.

I was thinking on getting 4 of them and I was thinking on mixing them with an
Arri kit.

Thanks for the help.