New EX3 Strong Plate, Shoulder Brace, and NanoFlash Arm etc. at DVinfo.net

Olof Ekbergh · February 20th, 2010, 05:48 PM

Here are some shots of my new plate system for the EX3. These shots are before anodizing and they have my VCT-14 tripod plate on the plate bottom. It also has the optional wing and shoulder brace attached.

The shoulder brace is quickly removable. It is well balanced like a full size cam if you stick a big battery in the back. There is lots of room for NanoFlash receivers etc..

One of the things I like about it is it sits flat on a table and fits in my runbag (Portabrace Smuggler) w/o disassembly.

The vertical part of the Shoulder brace has lots of holes for NanoFlash or whatever, if you don't want the "wing", and will accept lots of different battery plates, so you can power camera, NanoFlash and an on camera light or a monitor. You can still reach all the jacks and use a Sony or Swit battery in the EX3's battery slot.

Just the 2 piece plate will cost $150.00 and will be shipping by the end of February (not including VCT-14 tripod adapter). The wing and arms are the same parts I use for the EX1 system.

I am still finalizing the shoulder brace. It will probably cost $75.00.

I would appreciate any comments.

You can comment here or contact me:
olof@westsideav.com
603.383.9283

And check my website for more news, I will be updating it with the new products for the EX3 this week:
Stronger Tripod Plates . NanoFlash Brackets . Sliders by Westside A V

Andrew Stone · February 23rd, 2010, 08:24 AM

There is a lot to like about this Olof... The meaty connector to the VCT-14 plate, the holes on the bottom plate appear to be more functionally complete than other plates I have used/seen for the EX3, side mount & connecting knob for the nanoflash is good, throwing the battery out back is an excellent idea, both the weight of the nano & the battery will balance out the camera a lot for handheld work.

For those who will be in the market for this, you may wish to tell them the package price or list out the prices for the various components. Also a photo illustrating the HD-SDI cabling might help sell the unit... I would consider mounting the nano upside down with this configuration for practical reasons.

February 20th, 2010, 05:48 PM	#1
Olof Ekbergh Sponsor: Westside AV Join Date: Dec 2008 Location: Mount Washington Valley, NH, USA Posts: 1,365	New EX3 Strong Plate, Shoulder Brace, and NanoFlash Arm etc. Here are some shots of my new plate system for the EX3. These shots are before anodizing and they have my VCT-14 tripod plate on the plate bottom. It also has the optional wing and shoulder brace attached. The shoulder brace is quickly removable. It is well balanced like a full size cam if you stick a big battery in the back. There is lots of room for NanoFlash receivers etc.. One of the things I like about it is it sits flat on a table and fits in my runbag (Portabrace Smuggler) w/o disassembly. The vertical part of the Shoulder brace has lots of holes for NanoFlash or whatever, if you don't want the "wing", and will accept lots of different battery plates, so you can power camera, NanoFlash and an on camera light or a monitor. You can still reach all the jacks and use a Sony or Swit battery in the EX3's battery slot. Just the 2 piece plate will cost $150.00 and will be shipping by the end of February (not including VCT-14 tripod adapter). The wing and arms are the same parts I use for the EX1 system. I am still finalizing the shoulder brace. It will probably cost $75.00. I would appreciate any comments. You can comment here or contact me: olof@westsideav.com 603.383.9283 And check my website for more news, I will be updating it with the new products for the EX3 this week: Stronger Tripod Plates . NanoFlash Brackets . Sliders by Westside A V Attached Thumbnails

February 23rd, 2010, 08:24 AM	#2
Andrew Stone Major Player Join Date: Sep 2008 Location: Vancouver, Canada Posts: 975	There is a lot to like about this Olof... The meaty connector to the VCT-14 plate, the holes on the bottom plate appear to be more functionally complete than other plates I have used/seen for the EX3, side mount & connecting knob for the nanoflash is good, throwing the battery out back is an excellent idea, both the weight of the nano & the battery will balance out the camera a lot for handheld work. For those who will be in the market for this, you may wish to tell them the package price or list out the prices for the various components. Also a photo illustrating the HD-SDI cabling might help sell the unit... I would consider mounting the nano upside down with this configuration for practical reasons.